Specifications

II Parameters
Machine Error Compensation Parameters
II - 200
【#4009+10(n-1)】 refcmp Reference position compensation amount <n-th axis>
When two-way pitch error compensation is enabled, set the compensation amount of the
reference position when the axis moves to the position from the opposite direction of the
zero point return.
---Setting range---
-32768 to 32767
(Note) The actual compensation amount will be the value obtained by multiplying the setting
value with the compensation scale.
【#4101 - 5124】
Set the compensation amount for each axis.
---Setting range---
-32768 to 32767
(Note) The actual compensation amount will be the value obtained by multiplying the setting
value with the compensation scale.