Specifications

II Parameters
Rotary Axis Configuration Parameters
II - 198
【#7951(PR)】 TIANGW2 Inclination angle
Set the inclination angle if the table rotating type workpiece-side rotary axis is inclined. Set
the angle regarding CCW direction of the inclined plane as minus direction.
---Setting range---
-359.999 to 359.999 (°)
(Follow as "#1003 iunit Input setup unit".)
【#7952(PR)】 ROTAXW2 Rotary axis name
Set the name of the table rotating type workpiece-side rotary axis.
Set "0" when the axis has the mechanical axis specifications. (The setting is, however,
invalid in the tool center point control, R-Navi function.)
---Setting range---
0, A, B, C, U, V, W, X, Y, Z
【#7953】 DIR_W2 Rotation direction
Set the rotation direction for the table rotating type workpiece-side rotary axis.
0: CW
1: CCW
【#7954】 COFSW2H Horizontal axis rotation center offset
When all axes are at the machine basic point, set the distance in the horizontal axis
direction between rotation centers of the base-side rotary axis and the workpiece-side
rotary axis.
---Setting range---
-99999.999 to 99999.999 (mm)
【#7955】 COFSW2V Vertical axis rotation center offset
When all axes are at the machine basic point, set the distance in the vertical axis direction
between rotation centers of the base-side rotary axis and the workpiece-side rotary axis.
---Setting range---
-99999.999 to 99999.999 (mm)
【#7956】 COFSW2T Height axis rotation center offset
When all axes are at the machine basic point, set the distance in the height axis direction
between rotation centers of the base-side rotary axis and the workpiece-side rotary axis.
---Setting range---
-99999.999 to 99999.999 (mm)
【#7957】 CERRW2H Horizontal axis rotation center error compensation amount
Set the error compensation amount in the horizontal axis direction of the table rotating type
workpiece-side rotary axis rotation center.
---Setting range---
-99999.999 to 99999.999 (mm)
(Follow as "#1006 mcmpunit Machine error compensation unit".)
【#7958】 CERRW2V Vertical axis rotation center error compensation amount
Set the error compensation amount in the vertical axis direction of the table rotating type
workpiece-side rotary axis rotation center.
---Setting range---
-99999.999 to 99999.999 (mm)
(Follow as "#1006 mcmpunit Machine error compensation unit".)