Specifications

II Parameters
Rotary Axis Configuration Parameters
II - 196
【#7928】 CERRT1V Vertical axis rotation center error compensation amount
Set the error compensation amount in the vertical axis direction of the tool rotating type
base-side rotary axis rotation center.
---Setting range---
-99999.999 to 99999.999 (mm)
(Follow as "#1006 mcmpunit Machine error compensation unit".)
【#7930(PR)】 SLCT_T2 Rotary axis selection
Select in which axis direction to rotate the tool rotating type tool-side rotary axis.
If the tool axis is inclined, use the second digit to set the axis direction in which the tool axis
is inclined.
0: Invalid
1: I axis rotation
2: J axis rotation
3: K axis rotation
(Note) 0 to 99 can be set from the screen, but if an invalid value is set, the operation error
"M01 0127 Rot axis parameter error" will occur when the power supply is turned ON.
---Setting range---
0 to 3
12, 13, 21, 23, 31, 32
【#7931(PR)】 TIANGT2 Inclination angle
Set the inclination angle if the tool-rotation type tool-side rotary axis is inclined. Set the
angle regarding CCW direction of the inclined plane as plus direction.
---Setting range---
-359.999 to 359.999 (°)
(Follow as "#1003 iunit Input setup unit".)
【#7932(PR)】 ROTAXT2 Rotary axis name
Set the name of the tool rotating type tool-side rotary axis.
Set "0" when the axis has the mechanical axis specifications. (The setting is, however,
invalid in the tool center point control, R-Navi function.)
---Setting range---
0, A, B, C, U, V, W, X, Y, Z
【#7933】 DIR_T2 Rotation direction
Set the rotation direction of the tool rotating type tool-side rotary axis.
0: CW
1: CCW
【#7934】 COFST2H Horizontal axis rotation center offset
Set the distance in the horizontal axis direction between the spindle holder center and the
rotation center of the tool-side rotary axis.
---Setting range---
-99999.999 to 99999.999 (mm)
【#7935】 COFST2V Vertical axis rotation center offset
Set the distance in the vertical axis direction between the spindle holder center and the
rotation center of the tool-side rotary axis.
---Setting range---
-99999.999 to 99999.999 (mm)
【#7936】 COFST2T Height axis rotation center offset
Set the distance in the height axis direction between the spindle holder center and the
rotation center of the tool-side rotary axis.
---Setting range---
-99999.999 to 99999.999 (mm)
【#7937】 CERRT2H Horizontal axis rotation center error compensation amount
Set the error compensation amount in the horizontal axis direction of the tool rotating type
tool-side rotary axis rotation center.
---Setting range---
-99999.999 to 99999.999 (mm)
(Follow as "#1006 mcmpunit Machine error compensation unit".)
【#7938】 CERRT2V Vertical axis rotation center error compensation amount
Set the error compensation amount in the vertical axis direction of the tool rotating type tool-
side rotary axis rotation center.
---Setting range---
-99999.999 to 99999.999 (mm)
(Follow as "#1006 mcmpunit Machine error compensation unit".)