Specifications

II Parameters
Axis Specifications Parameters
II - 120
【#2144】 baseps Base machine coordinate zero point relative distance
Set each axis's position of the base machine coordinate zero point when an arbitrary point
M on the machine is regarded as a base point.
Unify the directions of all part systems' machine zero point positions with the direction of the
machine coordinate system of the 1st part system.
If the 1st part system doesn't have a parallel axis, determine the direction arbitrarily.
---Setting range---
-99999.999 to 99999.999 (mm)
【#2146】 Blf_L1 Reference distance for position-dependent increasing-type backlash
compensation 1
Set the distance for specifying the compensation change rate in position-dependent
increasing-type backlash compensation.
When "#2148 Blf_E1" is set to "0", the position-dependent increasing-type backlash
compensation function will be disabled.
---Setting range---
0.000 to 99999.999 (mm)
【#2147】 Blf_L2 Reference distance for position-dependent increasing-type backlash
compensation 2
Set the distance for specifying the compensation change rate in position-dependent
increasing-type backlash compensation.
When "#2148 Blf_E1" is set to "0", the position-dependent increasing-type backlash
compensation function will be disabled.
---Setting range---
0.000 to 99999.999 (mm)
M
X1
baseps
X2
baseps
Z1 baseps
Z2 baseps
System2
base machine
coordinate
zero point
Example: System1(X1, Z1), System2(X2, Z2)
System1
base machine
coordinate
zero point
Blf_E1
Blf_E2
Blf_L2 Blf_L1
Blf_E1
Blf_E2
Blf_L2 Blf_L1