Specifications

II Parameters
Base Specifications Parameters
II - 97
【#1590】 Animate ax direct Machine status animated display axis direction(+/-)
<bit0>
0: 1st axis + direction is set to the right direction.
1: 1st axis + direction is set to the left direction.
<bit1>
0: 2nd axis + direction is set to the rear direction.
1: 2nd axis + direction is set to the front direction.
<bit2>
0: 3rd axis + direction is set to the top direction.
1: 3rd axis + direction is set to the bottom direction.
【#1591】 Animate ax-1 Machine status animated display axis name (1st axis)
Set the name of the 1st axis displayed with the machine status animation. When the axis
name is not specified, the current 1st axis name ("#1013 axname") will be used.
---Setting range---
Axis name such as X, Y, Z
【#1592】 Animate ax-2 Machine status animated display axis name (2nd axis)
Set the name of the 2nd axis displayed with the machine status animation. When the axis
name is not specified, the current 2nd axis name ("#1013 axname") will be used.
---Setting range---
Axis name such as X, Y, Z
【#1593】 Animate ax-3 Machine status animated display axis name (3rd axis)
Set the name of the 3rd axis displayed with the machine status animation. When the axis
name is not specified, the current 3rd axis name ("#1013 axname") will be used.
---Setting range---
Axis name such as X, Y, Z
【#1901(PR)】 station addr
Not used. Set to "0".
【#1902(PR)】 Din size
Not used. Set to "0".
【#1903(PR)】 Dout size
Not used. Set to "0".
【#1904(PR)】 data length
Not used. Set to "0".
【#1905(PR)】 baud rate
Not used. Set to "0".
【#1906(PR)】 stop bit
Not used. Set to "0".
【#1907(PR)】 parity check
Not used. Set to "0".
【#1908(PR)】 even parity
Not used. Set to "0".
【#1909(PR)】 Tout (ini)
Not used. Set to "0".
【#1910(PR)】 Tout (run)
Not used. Set to "0".
【#1911(PR)】 clock select
Not used. Set to "0".
【#1925】 EtherNet Start of service
Start or stop the Ethernet communication function.
0: Stop
1: Start
【#1926(PR)】 Global IP address IP address
Set the main CPU's IP address.
Set the NC IP address seen from an external source.
【#1927(PR)】 Global Subnet mask Subnet mask
Set the subnet mask for the IP address.