Specifications

II Parameters
Base Specifications Parameters
II - 68
【#1219】 aux03
bit1: Stop high-speed PC monitoring function
Set "1" to disable the function that triggers the emergency stop when the PC high-speed
processing time is extended.
Disable the monitoring function only as a temporary measure.
bit5: Dog-type intermediate point
Select whether to move to the intermediate point during automatic dog-type reference
position return.
0: Not move.
1: Move.
bit7: Time constant setting changeover for soft acceleration/deceleration
0: Accelerating time is G0tL(G1tL).
When the G00 pre-interpolation acceleration/deceleration and the soft acceleration/
deceleration are used together, the inclination of soft acceleration/deceleration will
be steeper by setting a time to the soft acceleration/deceleration 2nd step time
constant (#2005 G0t1).
Consequently, the acceleration for G28/G30 will be larger than that for G00.
(1) Total accelerating time is "G0tL".
(2) The time for curve part is "G0t1".
(3) The time for linear part is obtained by "G0tL-(2 x G0t1)".
1: Accelerating time is obtained by G0tL+G0t1 (G1tL+G1t1).
When the G00 pre-interpolation acceleration/deceleration and the soft acceleration/
deceleration are used together, you can attain the G28/G30 acceleration that is
equal to G00, by setting the same value to G00 soft acceleration/deceleration filter
(#1569 SfiltG0) as well as to the soft acceleration/deceleration 2nd step time
constant (#2005 G0t1).
(1) Total accelerating time is obtained by "G0tL+G0t1".
(2) The time for curve part is "G0t1".
(3) The time for linear part is obtained by "G0tL-G0t1".
【#1220】 aux04 (for L system only)
bit 0: Tool life check timing selection
Select the criterion to judge the tool life end when the use count is incremented in tool life
management II.
0: Determine the tool life end when the incremented use count has exceeded the life
count. (Default)
(Use count > life count)
1: Determine the tool life end when the incremented use count has reached the life
count.
(Use count ≧ life count)
G0tl
G0tL㧙G0tl
G0tL
G0tl
㨠
㨠
S
p
eed
Acceleration
G0tL㧗G0t1
G0tL
G0t1
㨠
㨠
G0t1
Speed
Acceleration