Specifications
II Parameters
User Parameters
II - 18
【#8903】 Counter type 3
Set the type of counter displayed at the upper right of the AUTO/MDI display on the Monitor
screen.
1: Current position
2: Workpiece coordinate position
3: Machine position
4: Program position
8: Remain command
9: Manual interrupt amount
10: Next command
11: Restart position
12: Remain distance
16: Tip workpiece coordinate position
18: Tool axis movement
19: Tip machine position
20: Relative position
21: Table coordinate position
22: Workpiece installation position
23: Inclined surface coordinate
---Setting range---
1 to 23
【#8904】 Counter type 4
Set the type of counter displayed at the lower right of the AUTO/MDI display on the Monitor
screen.
1: Current position
2: Workpiece coordinate position
3: Machine position
4: Program position
8: Remain command
9: Manual interrupt amount
10: Next command
11: Restart position
12: Remain distance
16: Tip workpiece coordinate position
18: Tool axis movement
19: Tip machine position
20: Relative position
21: Table coordinate position
22: Workpiece installation position
23: Inclined surface coordinate
---Setting range---
1 to 23
【#8905】 Counter type 5
Set the type of counter displayed at the left of the Manual display on the Monitor screen.
1: Current position
2: Workpiece coordinate position
3: Machine position
4: Program position
8: Remain command
9: Manual interrupt amount
10: Next command
11: Restart position
12: Remain distance
16: Tip workpiece coordinate position
18: Tool axis movement
19: Tip machine position
20: Relative position
21: Table coordinate position
22: Workpiece installation position
23: Inclined surface coordinate
---Setting range---
1 to 23
【#8906】 Counter type 6
Set the type of counter displayed at the right of the Manual display on the Monitor screen.
1: Current position
2: Workpiece coordinate position
3: Machine position
4: Program position
8: Remain command
9: Manual interrupt amount
10: Next command
11: Restart position
12: Remain distance
16: Tip workpiece coordinate position
18: Tool axis movement
19: Tip machine position
20: Relative position
21: Table coordinate position
22: Workpiece installation position
23: Inclined surface coordinate
---Setting range---
1 to 23