Specifications

II Parameters
User Parameters
II - 14
【#8621】 Coord rot plane (H)
Set the plane (horizontal axis) for coordinate rotation control.
Usually, set the name of the 1st axis.
When this parameter is not set, the coordinate rotation function will not work.
---Setting range---
Axis name
【#8622】 Coord rot plane (V)
Set the plane (vertical axis) for coordinate rotation control.
Usually, set the name of the 2nd axis.
When this parameter is not set, the coordinate rotation function will not work.
---Setting range---
Axis name
【#8623】 Coord rot centr (H)
Set the center coordinates (horizontal axis) for coordinate rotation control.
---Setting range---
-999999.999 to 999999.999 (mm)
【#8624】 Coord rot centr (V)
Set the center coordinates (vertical axis) for coordinate rotation control.
---Setting range---
-999999.999 to 999999.999 (mm)
【#8625】 Coord rot vctr (H)
Set the vector components (horizontal axis) for coordinate rotation control.
When this parameter is set, the coordinate rotation control angle (#8627) will be
automatically calculated.
---Setting range---
-999999.999 to 999999.999 (mm)
【#8626】 Coord rot vctr (V)
Set the vector components (vertical axis) for coordinate rotation control.
When this parameter is set, the coordinate rotation control angle (#8627) will be
automatically calculated.
---Setting range---
-999999.999 to 999999.999 (mm)
【#8627】 Coord rot angle
Set the rotation angle for coordinate rotation control.
When this parameter is set, the coordinate rotation vector (#8625, #8626) will be "0".
---Setting range---
-360.000 to 360.000 (°)
【#8701】 Tool length
Set the length to the touch tool tip.
---Setting range---
-99999.999 to 99999.999 (mm)
【#8702】 Tool Dia
Set the diameter of the sphere at the touch tool tip.
---Setting range---
-99999.999 to 99999.999 (mm)
【#8703】 OFFSET X
This sets the deviation amount (X direction) from the touch tool center to the spindle center.
---Setting range---
-99999.999 to 99999.999 (mm)
【#8704】 OFFSET Y
Set the deviation amount (Y direction) from the touch tool center to the spindle center.
---Setting range---
-99999.999 to 99999.999 (mm)
【#8705】 RETURN
Set the one-time return distance for contacting again.
---Setting range---
0 to 99999.999 (mm)
【#8706】 FEED
Set the feedrate when contacting again.
---Setting range---
1 to 60000 (mm/min)