Specifications

41
CONNECTIONS
PRINTING
PRECAUTIONS FEATURES
PREPARATION
OTHERS
TROUBLE-
SHOOTING
ADJUSTMENTS
INPUT
FIELD NOR/REV
AFC OFF/ON
AGC OFF/ON
DCF OFF/ON
OUTPUT
MONI R-SUB 0
MONI B-SUB 0
MEMORY SYNC EXT/INT
INPUT Input signal setting display
• Set this menu before memorizing image.
FIELD The odd and even field lines will be reversed depending on
the input interlaced signal. Printing image is not clear so
that the odd and even field lines may be reversed depend-
ing on the input interlaced signal. In this case, FIELD is set
to “REV.” (The image disorder cannot be seen in monitor
display.)
NOR(Normal) Does not reverse FIELD as remaining the input interlaced
signal.
REV(Reverse) Reverse the even and odd numbers of FIELD
AFC(Automatic frequency control)
The image distortion on the top may occur when the VCR
image is special input such as in pause, field-by-field
playback, or FF playback mode. Also, the image is not
printed correctly because of a weak TV signal. In this case,
set the AFC function to “ON.”
• The image distortion on the top may occur by the special signal when AFC is set to
“ON”. In this case, set it to “OFF.”
OFF AFC is invalid.
ON AFC is available.
AGC(Automatic gain control)
This function is to automatically adjust a dark picture in brightness and
print with sharp contrast. Peak level of an input signal is detected and
signal width is standardized to the appropriate value.
OFF AGC is invalid.
ON AGC is available.
DCF This function selects whether separating the composite video signal
or not. When inputting the monochrome signal, set this function to
OFF. The input signal is not through DCF circuit, so that this
function is for high quality of monochrome image. When inputting
the colour composite signal, set this function to “ON.” Input signal
is through DCF circuit and the composite video signal is separated.
OFF When inputting monochrome signal
ON When inputting colour signal
• This function is not available when selecting S-VIDEO.
OUTPUT Output signal setting display
MONI R-SUB Adjusts red-subcontrast on the monitor. Red is added with and
blue is added with .
MONI B-SUB Adjusts blue-subcontrast on the monitor. Blue is added with and
yellow is added with .
MEMORY SYNC Selects the Sync. signal for displaying memory image.
EXT Selects Sync. output signal, and displays memory image.
INT Selects Sync. input signal, and displays memory image.
• Selecting Sync. output signal may not display memory image correctly depending
on the connection. In this case, set SYNC to “INT”.
• When selecting INT and displaying the memory image, the comment is not displayed.