Specifications

34
ADJUSTMENTS & SETTINGS (MAIN MENU)
Examples of SIZE, DIR and MIRROR setting
(This image is limited in printing with white by SIZE setting.)
When the values of
TOP and RIGHT are
small
Standard print
When the values of
BOTTOM and LEFT
are small
When the values of TOP
and RIGHT are small and
MIRROR is ON
When the values of TOP
and RIGHT are small
and DIR is REV
When the values of TOP
and RIGHT are small and
MIRROR is ON and DIR is
REV
PRINT Print setting display
APT (Aperture) Controls apertures and reinforces or softens the contour of image.
S (SOFT) Softens the contour.
N (NORMAL) Does not perform APT.
H1 (HARD 1) Reinforces the contour.
H2 (HARD 2) Reinforces the contour more.
DIR (Print direction) Selects printing direction. The left and right margin sizes will be
different on L size paper.
NOR The margin is made on the lower position.
REV The margin is made on the upper position.
MIRROR Selects the mirror (left/right inversed) prints.
OFF Normal print
ON Mirror print
PRN SPEED (Printing speed) Selects the printing speed.
FAST High speed printing
(S size : 1280 dots (100mm) x 600 lines (75mm))
NORMAL Prints lines in double density.
(S size : 1280 dots (100mm) x 1200 lines (75mm))
• Only NORMAL is available when using CK900S4P(HX)EU or CK900L4P(HX)EU or
selecting IMAGES : 2S.
• ONLY FAST is available when selecting THERMAL : ON.
PRINT
APT S/N/H1/H2
DIR NOR/REV
MIRROR OFF/ON
PRN SPEED FAST/NORMAL