Specifications

33
CONNECTIONS
PRINTING
PRECAUTIONS FEATURES
PREPARATION
OTHERS
TROUBLE-
SHOOTING
ADJUSTMENTS
IMAGES Selects the number of images on a sheet. Is displayed when setting
MULTI: ON.
2 2-images on a sheet. (2 S-size images can be printed in L size
print. However, the top and bottom of the image will be clipped.)
2S 2 reduced images on a sheet. (For L size print, the images can be
printed without clipping by reducing S size images. In the case, the
printing speed (PRN SPEED) becomes NORMAL. For S size print,
2 images can be printed as the same result as 2 mode.)
4 4-images on a sheet
16 16-images on a sheet
• 2S is not displayed when selecting THERMAL : ON.
• When selecting MODE : PHOTO1, the following sizes are available.
CARD 20mm x 15mm
3 * 4 30mm x 40mm
5 * 5 50mm x 50mm
3 * 3.5 30mm x 35mm
SIZE Sets the print area of the image. Choose from 3 preset print areas or a user
selectable area.
Printed image size of 1 image mode(mm)
(S size) (L size)
W 100X75 125X94
M 94X70 118X89
N 90X68 113X85
USER Optional size by user
• Part of the image may be clipped from the print depending on the print size.
COPY Copies a printed image size which is set W, M, or N in size. The
selected setting level is displayed as TOP, BOTTOM, LEFT and
RIGHT. These levels become the changing base.
TOP/BOTTOM/LEFT/RIGHT
Sets the printing area of the image. Adjust the size with or
button.
TOP Shifts the upper end of the image (setting area : 0 to -48)
BOTTOM Shifts the lower end of the image (setting area : 0 to -48)
LEFT Shifts the left end of the image (setting area : 0 to -63)
RIGHT Shifts the right end of the image (setting area : 0 to -63)
NOTE
• When monochrome signal is input, colours may not be added to the characters
displayed on the monitor. In that case, set SELECT of ANALOG COLOR ADJ MENU
to “B&W” in SERVICE MENU.
• When SIZE is set to W or the minus value is increased on H-POSI, the monitor
screen may get darker according to the monitor connected. However, the image
will be printed correctly.