Specifications

ManualsBrandsMitsubishi ManualsComputer equipmentCP910E

COLOR ADJ Colour adjustment display

• The colour of the source image and memorized image can be adjusted.

• Open this menu also by pressing the COLOR ADJ button on the remote control unit.

SELECT Selects colour print or black and white print.

COLOR Colour print

B&W Black and white print (The monitor shows in colours.)

BRT (Bright) Adjusts brightness of the printing image. (The whole image will be

adjusted.)

CONT (Contrast) Adjusts contrast of the printing image. (The image will be adjusted

based on the black level.)

R-SUB Adjusts red-subcontrast of the printing image. Red is added with

and blue is added with .

G-SUB Adjusts green-subcontrast of the printing image. Green is added

with and pink is added with .

B-SUB Adjusts blue-subcontrast of the printing image. Blue is added with

and yellow is added with .

CENTER When pressing , the values of BRT, CONT, R-SUB G-SUB and

B-SUB will be reset to 0.

CANCEL Cancels the change of COLOR ADJ and resets to the stored setting.

• When selecting B&W, R-SUB, G-SUB and B-SUB change to Y-SUB, M-SUB, C-

SUB. When selecting THERMAL : OFF (colour print), each value of Y-SUB, M-

SUB and C-SUB is available to adjust the colour of the printed image. When selecting

THERMAL : ON (thermal print), only Y-SUB value is available and function as the

density of gray colour of the printed image.

• When SELECT is changed from COLOR to B&W, the set values of R-SUB, G-SUB,

and B-SUB function as the density of gray colour.

LAYOUT Layout setting display

MODE Selects the print size. Normally select the ink sheet size which is

installed in this unit. (See page 12 for the print paper.)

AUTO L size ink sheet.

When S size ink sheet is installed, S size is automatically set.

S S size ink sheet or S size printing with L size ink sheet, and S size

printing with thermal paper.

L L size printing with thermal paper.

• When using thermal paper (selecting THERMAL : ON in SYSTEM SETUP menu),

AUTO/S is changed to L/S.

MULTI Selects ON or OFF for 2, 4, or 16 images on a sheet.

OFF Multi-image print is not available. 1 image mode.

OFF(PRN SELECT)

4 memory pages display. 1 image mode.

ON Multi-image print is available.

• When selecting OFF or OFF(PRN SELECT), MODE: SAME/DIFF/PHOTO1 and

IMAGES : 2/2S/4/16 are not displayed.

• When setting AUTO CLEAR to MEM or AFTER PRN in OFF(PRN SELECT), only

selecting page is cleared.

MODE Selects print mode.

SAME Prints images of the same scenes on a sheet.

DIFF (Different) Prints images of different scenes on a sheet.

PHOTO1 Prints images in PHOTO mode.

• This menu is displayed only when MULTI : ON is selected.

COLOR ADJ

SELECT COLOR/B&W

BRT : 0

CONT : 0

R-SUB : 0 C R

G-SUB : 0 M G

B-SUB : 0 Y B

CENTER

CANCEL

ADJUSTMENTS & SETTINGS (MAIN MENU)

LAYOUT

MODE AUTO/S

MULTI

OFF/OFF(PRN SELECT)/ON

MODE

SAME/DIFF/PHOTO1

IMAGES

2/2S/4/16

SIZE W/M/N/USER