Specifications
27
CONNECTIONS
PRINTING
ADJUSTMENTS
PRECAUTIONS FEATURES
PREPARATION
OTHERS
TROUBLE-
SHOOTING
EXTERNAL REMOTE TERMINAL 2
The image can be stored in memory and printed by sending the remote signal through
the external remote terminal on the rear panel.
• Make out the necessary circuit to use this function by referring to the following.
EXTERNAL REMOTE TERMINAL SIGNAL ALLOCATION (MINI
DIN8PIN)
Pin No. Function Description
Ground Earth
MEMORY Memory : When the signal becomes “LOW” from “HIGH”, the
image is stored in memory. (When the signal has
been “LOW” for 15ms or more, the image is stored
in memory.) See page 42, 43.
BUSY2 Refer to the BUSY LEVEL setting of REMOTE SET in
SERVICE MENU. See page 43.
BUSY1 Refer to the BUSY LEVEL setting of REMOTE SET in
SERVICE MENU. See page 43.
PRINT When the signal becomes “LOW” from “HIGH”, the image is
stored in memory. (When the signal has been “LOW” for 15ms
or more, the image is stored in memory.)
REMOTE The same functions as the supplied remote control can be
controlled.
Unused
DC3V Power supply for the remote control DC 1mA Max.
• When the signal from BUSY terminal is received with TTL level, keep the following.
| I
OL
| = 2mA or less, | I
OH
| = 1mA or less
| I
OL
| means the current flowing into the unit at Low output, | I
OH
| means the
current flowing out of the unit at High output.
• Just after completing printing, there is a period that memory signal is not accepted.
Pin No.
22kΩ
22kΩ
10kΩ
100Ω
DTC124EK
DC5V
1kΩ
74LVC125
10kΩ
100Ω
DC5V
To VCP
To VCP
From VCP
To VCP
Circuit inside the VCP
MEMORY
BUSY2
PRINT
REMOTE
BUSY1
74LVC125
10kΩ
100Ω
DC5V
TTL level
TTL level
56kΩ
PIN NO. REMOTE TERMINAL
By sending the following remote control codes from pin No.6, the same functions as the wired
remote control unit supplied can be controlled.
01: button 02: button 03: button 04: button
08: PRINT Q’ty button 09*
0A*: MENU button 0B*: CLEAR button 0C: PRINT Q’ty button
0D* 0E*: SET button 0F*: STOP button
12*: PROGRAM button 13*: PRINT button 15*: FIELD/FRAME button
16*: COLOR ADJ button 17*: MEMORY button 18*: DISPLAY button
1C*: MEMORY PAGE button 1D*: MONITOR button
In case of the codes with * mark, 5 words are sent.
TIMING CHART
Input signal level : TTL
Input timing : 1 word 38.4 ms (reference)
1.6 ms (T
2
)
0.4 ms (T
1
)
3.2 ms (T
3
)
0.4 ms (T
1
)
(EXAMPLE) Print code
= 13 = 0 1 0 0 1 1
110010
T
4
1 word
(The above values are references.)
T
1
≥ 0.4ms
1.5ms < T
2
< 2ms
2ms < T
3
< 4.2ms
13ms < T
4
< 90ms