Instruction manual

37
CONNECTIONS
PRINTING
ADJUSTMENTS
PRECAUTIONS FEATURES
PREPARATION
OTHERS
TROUBLE-
SHOOTING
Press OPEN button to pull out the printing unit.
When it is not working, turn off the power once. Then try to press OPEN button again.
Remove the ink cassette with ink sheet.
Remove the print paper as shown right.
Cut the defective part of the print paper with scissors.
Cut both edges of the print paper.
Install the print paper. (Refer to pages 11-12.)
NOTE
To feed the print paper, press MEMORY button while pressing MONITOR button.
When carrying out this procedure, make sure to press MONITOR button first.
If MEMORY button is pressed first, a new image will be stored in memory and the previously
memorized image will be erased. When using the remain warning functions (except
SERVICE MENU REMAINING BUZZER: 0), feed and cut by pressing MEMORY and
MONITOR buttons initializes the remaining counter. Press MEMORY and PRINT buttons
to feed and cut so that the counter is not initialized.
OVERCOMING PAPER JAMS
1
2