Instruction manual

29
CONNECTIONS
PRINTING
PRECAUTIONS FEATURES
PREPARATION
OTHERS
TROUBLE-
SHOOTING
ADJUSTMENTS
SYSTEM SETUP System setting display
INCREMENT
OFF Page increment is not available.
PAGE Every time pressing MEMORY button, memory page goes to the next
page and image will be memorized on it.
BUZZER Selects sounds the buzzer when pressing the buttons on the VCP
and remote control unit.
OFF Does not sound the buzzer
T1 Sounds the buzzer (Tone 1)
T2 Sounds the buzzer (Tone 2)
REMAINING BUZZER Informs the number of remaining ink sheet by a buzzer
tone.
OFF Does not sound the buzzer.
0 ~ 10 The buzzer sounds three times when 0 ~ 10 ink sheet are left
(available to set 1 sheet each).
When the number of remaining ink sheet reaches to the set value, the
buzzer starts sounding at printing each time.
• If a paper jam occurs, the remaining ink sheet may not be informed correctly.
• Make sure to replace the print paper and ink sheet at the same time.
REMAINING SCREEN Selects displaying the remains of ink sheet on the monitor or not.
OFF Does not display the remains of ink sheet on the monitor.
ON Displays the remains of ink sheet on the monitor.
• If a paper jam occurs, the remains of the ink sheet may be different from the indication
on the monitor.
AUTO FEED&CUT Selects automatically feeding and cutting the print paper or not.
OFF Does not feed and cut the print paper.
ON When setting the print paper, this unit automatically feeds and cuts it twice
after closing the front door.
PAPER HOLD Sets to hold the printed paper or not.
OFF PAPER HOLD is not available.
ON Printed paper is held at the print outlet after cut. Pull the paper out when
necessary.
It is recommended not to leave the printed paper holding at the print outlet.
Do not turn off the power while holding paper or some malfunction may
occur.
You can not use remote control unit with holding paper.
INIT PROG (Initialize program)
ALL Mode to initialize the programs in MAIN MENU and SERVICE MENU.
MAIN Mode to initialize the programs in MAIN MENU.
SERVICE Mode to initialize the programs in SERVICE MENU.
INITIALIZE
OFF
GO Starts initializing. When SET button is pressed, initializing starts.
GAMMA ADJ Adjusting gamma curve display
INIT :[CLEAR] Initializes each setting
COLOR Selects the adjusting gamma level.
ALL Adjusting gamma level for all colors.
EACH Adjusting gamma level for each color of R, G, B.
SYSTEM SETUP
INCREMENT OFF/PAGE
BUZZER OFF/T1/T2
REMAINING BUZZER OFF/0
REMAINING SCREEN OFF/ON
AUTO FEED&CUT OFF/ON
PAPER HOLD OFF/ON
INIT PROG ALL/MAIN/SERVICE
INITIALIZE OFF/GO
GAMMA ADJ INIT: [CLEAR]
COLOR ALL/EACH
SELECT R/G/B
Hi 0
Mid 0
Low 0
POINT 64 128 192