Instruction manual

28
ADJUSTMENTS & SETTINGS (SERVICE MENU)
SERVICE MENU ITEMS
SYSTEM Sets page increment, buzzer and remaining of ink sheet.
GAMMA ADJ Sets gamma curve level.
LAYOUT2 Adjusts print layout setting.
ANALOG COLOR ADJ Adjusts analog input signal image.
INPUT Sets even/odd number of FIELD, adjusts display, etc.
OUTPUT Sets sub-contrast of the monitor.
KEY SET Selects the functions of the buttons and function of remote
terminal.
RS232C Selects baud rate.
REMOTE Selects remote signal.
PREVIOUS ERROR Shows error history.
OPERATING SERVICE MENU
Press MENU button on the remote control unit.
The MAIN MENU is displayed.
Press STOP buttons on the remote control unit at the same time.
The SERVICE MENU is displayed.
Select your desired item by pressing or on the remote control
unit.
Press button to open a sub menu.
Select an item you wish to adjust by pressing or .
Press or button to select an item or change value.
Press SET button.
SERVICE MENU is displayed.
“SAVE PRG 1/2/3/CANCEL” is selected.
This menu lets you select a user program memory (1-3) to store your new settings.
Press or button to select the user memory numbers of 1, 2
or 3 to store the setting.
The program is replaced. In case of keeping the stored program, do not select the
user memory number in which the setting is stored.
If you wish to cancel the setting, select CANCEL.
Press SET button.
When selecting PRG1 to set, “1” is chosen. When memorizing in a different user
memory number, select the number of the program.
The setting is completed and the normal screen is displayed.
SERVICE MENU
SYSTEM [ ]
GAMMA ADJ [ ]
LAYOUT2 [ ]
ANALOG COLOR ADJ [ ]
INPUT [ ]
OUTPUT [ ]
KEY SET [ ]
RS232C [ ]
REMOTE [ ]
PREVIOUS ERROR [ ]
SAVE PRG 1/2/3/CANCEL
ALARM SHEET PAPER S-VIDEO
MENU
CLEAR STOP
SET
PRINT
Q' ty
(EXAMPLE) Selecting SYSTEM SETUP display
SYSTEM SETUP
INCREMENT OFF/PAGE
BUZZER OFF/T1/T2
REMAINING BUZZER OFF/0
REMAINING SCREEN OFF/ON
AUTO FEED&CUT OFF/ON
PAPER HOLD OFF/ON
INIT PROG ALL/MAIN/SERVICE
INITIALIZE OFF/GO
SERVICE MENU
SYSTEM [ ]
GAMMA ADJ [ ]
LAYOUT2 [ ]
ANALOG COLOR ADJ [ ]
INPUT [ ]
OUTPUT [ ]
KEY SET [ ]
RS232C [ ]
REMOTE [ ]
PREVIOUS ERROR [ ]
SAVE PRG 1/2/3/CANCEL