Instruction manual

27
CONNECTIONS
PRINTING
PRECAUTIONS FEATURES
PREPARATION
OTHERS
TROUBLE-
SHOOTING
ADJUSTMENTS
PRINT
APT S/N/H1/H2
DIR NOR/REV
MIRROR OFF/ON
MEMORY POSITION
LINE OFF/ON
H-POSI 0
V-POSI 0
PRINT Print setting display
APT (Aperture) Controls apertures and reinforces or softens the contour of image.
S (SOFT) Softens the contour.
N (NORMAL) Does not reinforce the contour.
H1 (HARD 1) Reinforces the contour.
H2 (HARD 2) Reinforces the contour more.
DIR (Print direction) Selects printing direction.
NOR The margin is made on the lower position.
REV The margin is made on the upper position.
MIRROR Selects the mirror (left/right inversed) prints.
OFF Normal print
ON Mirror print
Examples of SIZE, DIR and MIRROR setting
(The image is limited in printing with white by SIZE setting.)
MEMORY POSITION Memory and Position setting display
• The print area settings made with this menu can be memorized as a user program
setting.
LINE Selects whether showing a frame of print area or not.
OFF A frame of print area is not shown.
ON A frame of print area is shown.
• When this menu is set to OFF, FIELD/FRAME button on the remote control unit is not available.
H-POSI Changes the horizontal start position of input signal
The whole data image can be moved horizontally by changing the setting
number.
Setting area -10 ~ +15
• Setting below -11 may cause disabilities of memory, or switching memory display and
monitor display during printing.
V-POSI Changes the vertical start position of input signal
The whole data image can be moved vertically by changing the setting
number.
Setting area -10 ~ +3
• Setting below -11 may cause disabilities of memory, or switching memory display and
monitor display during printing.
When the values of
TOP and RIGHT are
small
Standard print
When the values of
BOTTOM and LEFT
are small
When the values of TOP
and RIGHT are small and
MIRROR is ON
When the values of TOP
and RIGHT are small
and DIR is ON
When the values of TOP
and RIGHT are small and
MIRROR and DIR are ON
H-POSI
V-POSI
+
+
LINE