Instruction manual

21
CONNECTIONS
PRINTING
ADJUSTMENTS
PRECAUTIONS FEATURES
PREPARATION
OTHERS
TROUBLE-
SHOOTING
PIN NO. REMOTE TERMINAL
By sending the following remote control codes from pin No.6, the same functions as the wired
remote control unit supplied can be controlled.
01: button 02: button 03: button 04: button
08: PRINT Q’ty button 09*
0A*: MENU button 0B*: CLEAR button 0C: PRINT Q’ty button
0D* 0E*: SET button 0F*: STOP button
12*: PROGRAM button 13*: PRINT button 15*: FIELD/FRAME button
16*: COLOR ADJ button 17*: MEMORY button 18*: DISPLAY button
1C*: MEMORY PAGE button 1D*: MONITOR button
In case of the codes with * mark, 5 words are sent.
TIMING CHART
Input signal level : TTL
Input timing : 1 word 38.4 ms
1.6 ms
0.4 ms
3.2 ms
0.4 ms
(EXAMPLE) Print code
= 13 = 0 1 0 0 1 1
110010
1 word = 38.4 msec.
CAMERA-IN TERMINAL
CAMERA-IN TERMINAL SIGNAL ALLOCATION (25 PIN)
Pin No. Signal line name
1 GND
2 TXD
3 RXD
4RTS
5 CTS
6 DSR
7 GND
8NC
9 GND
10 Comp.Video OUT
11 GND
12 S-video (C) IN
13 S-Video (Y) IN
Pin No. Signal line name
14 +12V (Max. 1A)
15 GND
16 GND
17 GND
18 GND
19 GND
20 DTR
21 GND
22 GND
23 GND
24 GND
25 REMOCON