Instruction manual

10
CONNECTIONS
The functions of this unit can be set by the menu screens displayed on the monitor.
Connect this unit with a monitor to check the images to be printed and the images stored in memory.
The following example shows the connection with monitor and camera.
Connect with the necessary signal equipment.
Make sure to turn off the power of the unit and connecting equipment before connection.
CONNECTION WITH MONITOR AND CAMERA
(EXAMPLE)
REMOTE
CAMERA-IN
S-VIDEO/IN
S-VIDEO/OUT
VIDEO OUT
AC IN
To camera terminal
To CAMERA-IN
terminal
VCP
Camera
To S-VIDEO OUT terminal
S-VIDEO OUT
To S-VIDEO IN terminal
To VIDEO OUT terminal
VIDEO OUT
To VIDEO IN terminal
Monitor (PAL)
• Make sure to turn off the power before setting.
• Never connect CAMERA-IN terminal to a personal computer.