Instruction manual

9
CONNECTIONS
PRINTING
ADJUSTMENTS
PRECAUTIONS
FEATURES
PREPARATION
OTHERS
TROUBLE-
SHOOTING
REMOTE CONTROL UNIT
SET BUTTON
Press to display the items of the MENU. Repress to
memorize the values and exit the MENU mode. See pages
22-23.
STOP BUTTONS
Press to cancel the printing process and start mechanical
initializing. When pressing these buttons during displaying
the main menu, the service menu will be displayed. When
pressing these buttons during stand-by status, the print
quantity is set to 1.
MEMORY PAGE BUTTON
Use to select the image memorized . The memory page is
switched every time this button is pressed. The selected
memory page mark illuminates.
PRINT BUTTON
Press to print the image memorized with the MEMORY
button.
PROGRAM BUTTON
Press the PROG. button to select between 3 types of user
presets. Functions previously set with the MENU can be
stored into one of 3 memories and recalled. Programs
cannot be changed during printing. The selected program
number is displayed for 3 seconds after pressing this
button. It may take longer to change the program.
, , , BUTTONS
Use to set the MENU display. Values are increased/
decreased and the cursor position is changed with these
four buttons. See page 24 and 28.
MENU BUTTON
Press to display MAIN MENU used for various settings.
See pages 22-23.
CLEAR BUTTONS
Press to eliminate all or a part of memorized images.
MONITOR BUTTON
Press to switch the image of the input signal and the
memorized image being displayed.
MEMORY BUTTON
Use to memorize the image to be printed. The memorized
image is displayed on the monitor screen, and then the
image of the input signal is displayed.
COLOR ADJUST BUTTON
Press to switch black and white / color print.
FIELD/FRAME BUTTON (LINE ON/OFF)
Press to switch on/off of the frame showing the print area
on the display. This button is available when LINE of
MEMORY POSITION menu in MAIN MENU is set to ON.
DISPLAY BUTTON
Press to display the set condition on the monitor screen.
Press again to switch off the display.
PRINT QUANTITY , BUTTONS
Use to set the number of copies to be printed. Press to
increase the number and to decrease the number. The
set number of copies is displayed on the monitor screen
for 3 seconds after pressing these buttons. See page 18.
When pressing or button during printing, the counter
becomes “1” and continuous printing is cancelled.
PROG.
MENU
CLEAR
MONITOR
MEMORY
MEMORY
PAGE
STOP
SET
COLOR FIELD
ADJUST /FRAME
DISPLAY
PRINT
Q' ty
PRINT