Instruction manual

7
CONNECTIONS
PRINTING
ADJUSTMENTS
PRECAUTIONS
FEATURES
PREPARATION
OTHERS
TROUBLE-
SHOOTING
FEATURES & FUNCTIONS
FRONT PANEL
POWER BUTTON (INDICATOR)
Press to turn on power. Press again to turn off power.
When the power is turned on, the indicator illuminates.
ALARM INDICATOR
When this unit is overheated, this indicator goes on and
off. When other error occurs, it lights up.
SHEET ERROR INDICATOR
When an error concerning ink sheet occurs, this indicator
lights up.
PAPER ERROR INDICATOR
When an error concerning print paper occurs, this indicator
lights up.
INPUT SIGNAL INDICATOR
This lamp always lights up.
MENU BUTTON
Press for color adjustment. The item will be switched in
order of;
SELECT COLOR/B&W →BRT → CONT → R-SUB → G-SUB
→ B-SUB→ CENTER → CANCEL → SET → SELECT
COLOR/B&W. (When selecting B&W, R-SUB, G-SUB, B-SUB
change to Y-SUB, M-SUB, C-SUB.)
To go back to the normal screen, press PLUS (+) button
while CANCEL or SET is selected.
See page 26.
MINUS (-) BUTTON
Press to decrease the value of each setting item. To set
the value, select SET with MENU button and press
PLUS (+) button.
PLUS (+) BUTTON
Press to increase the value of each setting item. To set
the value, select SET with MENU button and press this
button.
MONITOR BUTTON
Switches the display on the monitor. When this button is
pressed, the picture on the monitor screen switches
between the picture of the input signal (source image) and
the memorized image.
When pressing MEMORY button while holding this button,
print paper will be fed and cut automatically, and the
mechanism will be initialized. Make sure to press
MONITOR button first, or a new image will be memorized.
MEMORY BUTTON
Press to memorize the image to be printed.
PRINT BUTTON
Press to print the image memorized by the MEMORY
button. The image on the monitor screen switches to the
picture of the input signal.
PRINT OUTLET
The printed paper comes out here.
Do not put any objects in front of the outlet.
OPEN BUTTON
Press to slide out the printing mechanism. Open the
mechanism to load paper and ink cassette or to clear a
paper jam.
TRAY
Holds the printed paper which was come out from the print
outlet. Press down the knob to pull out the tray. Make sure
to pull it out before using this unit.
REMOTE TERMINAL
Connects the remote control unit supplied.
PRINTING UNIT LOCK SWITCH
Locks the printing unit.
Shift the switch to the left (LOCK side) to lock and to the
right (UNLOCK side) to unlock.
This unit is locked when shipping. When transporting this
unit, make sure to lock the unit.
ALARM SHEET PAPER S-VIDEO