Technical data

Receipt Printer TP07
01750096767 F MEDIATE Kiosk System – Operating Manual 31
Place the paper roll with the shaft in
the shaft mountings (A) from above
(see arrow (1)). Mind the direction in
which the paper unrolls (2).
Take the front edge of the paper over
the upper axle and feed it into the
paper support (1).
Keep pushing the paper into the paper
support until it is drawn in
automatically, cut off and the
produced receipt is output via the
presenter.
If the paper is loaded correctly the
following text will be printed on the
first receipt:
If you can read this text,
Autoloading is successful
Remove the receipt from the
presenter.