Specifications

About the paper/ink ribbon set
Additional information
EN-38
About the paper/ink ribbon set
• When ordering, please specify the models indicated in the table below.
• The used ribbon cartridge is not reusable.
• Handle ribbon cartridges carefully to ensure that they remain clean.
• Do not disassemble ribbon cartridges.
• Fingerprints, dust, scratches, oil, or other debris on the print surface may degrade printing quality.
• Do not use sheets of paper that have already been printed on. A failure might occur. Do not use sheets of
paper that have been ejected.
• Do not unpack paper/ink ribbon set until you are ready to use them.
• Ribbon cartridges are made of plastic. When disposing, check local regulations.
Storage considerations
Avoid the following places or conditions when storing paper and ribbon cartridge.
- Do not store paper and ribbon cartridge in places subject to extreme temperatures (30°C (86°F) or higher
or 5°C (41°F) or lower), or in places exposed to excessive dust or moisture.
- Do not leave paper and ribbon cartridge in the places that are exposed to direct sunlight or other sources
of strong light. Observe this instruction also when the paper and ribbon cartridge are loaded on the printer.
- Do not store paper and ribbon cartridge together with chemicals.
Storage paper
Type of Paper/Ink ribbon set Model Capacity
Paper/ink ribbon set for 4 × 6 (3.9" × 5.8") printing CK-D2S 50
Close the paper-cassette cover until it clicks into place.
When printing, open the paper-cassette cover until it clicks into
place.