Specifications

Error signals
Additional information
EN-33
Error signals
* This light goes off when the connection is complete.
Indicator
Indicator
status
Printer status Solution Page(s)
Power On Power ON
–
18
Off Power OFF
Access On* Connected to a
digital camera, or
the printer is
cooling off
Wait for a while. Do not disconnect
the digital camera or PC.
–
Blinking
slowly
Communicating
Blinking
very slowly
Printing
––
PAPER Blinking
slowly
Out of paper Load paper into the paper-cassette. 22, 32
RIBBON Blinking
slowly
End of ink
ribbon
Replace the ribbon cartridge with a
new one.
19, 32
No ribbon
cartridge is set
Set a ribbon cartridge into the printer. 19
Access and PAPER Blinking
together
Paper jam Remove jammed paper. 36
Access and
RIBBON
Blinking
together
Communication
error
Check whether the digital camera
supports PictBridge.
–
Turn the printer off and on, then try
printing again. If the error persists,
contact your dealer.
–
Access, RIBBON,
and PAPER
Blinking
together
Internal problem Contact your dealer.
–