Specifications

Loading the ribbon cartridge
Preparation
EN-19
Loading the ribbon cartridge
About the paper/ink ribbon set
For printing, paper/ink ribbon set (not supplied) are required.
For details, refer to “About the paper/ink ribbon set” (gpage 38).
Setting the ribbon cartridge
1 Open the ribbon cartridge door.
2 Remove slack from the ribbon.
If the ribbon cartridge has been used before, take in any ribbon slack before loading.
Notes
• Use ribbon cartridges and paper that are packaged together.
• Do not use paper that has already been printed on or ejected.
Turn the roll in the direction indicated by the arrow while holding the roller in place.