User`s manual

Setting Up the Printer Setting Up the Printer
SeSettt it ni gng UUpp tht ehe PrPrinintet re
r
7. Remove the tape, and advance the roll as indicated by the arrow. Set the end of the paper about 5mm beyond
the roller. When doing this, insert the paper straight along the seal. If it isn’t inserted straight, the paper will
be crooked, which could cause white line on the edges of the print, ribbon wrinkles, and register slippage.
Path of the paper
As seen from above
○ ×
8. Set the paper cassette into the printer.
13