Technical data

30
MITSUBISHI ELECTRIC
OPTIONS AND PERIPHERAL EQUIPMENT
4
왎
Buffer Battery
These terminal blocks TB-20/TB-50 are
adapter modules that simplify the wiring
of the inputs and outputs of the servo
amplifiers.
In addition preconfigured system cabling
is available for all the terminal blocks
왎 Terminal Blocks
The servomotor's absolute value can be
maintained by mounting the MR-J3BAT
battery on the servo amplifier. The battery
is not required when the servo system is
used in incremental mode.
Battery
Application
Art. no.
MR-J3BAT
Buffering absolute
positioning data
160224
TB-20-S TB-20-C
TB-50-S TB- 50-C
Terminal block type Input/output block
Input/output block
Channels 8 / 16
50
Design 20 pin terminal module
50 pin terminal module
Connection type Screw terminals Spring terminals
Screw terminals Spring terminals
Application
MR-J3-B, MR-J3-D01 or
positioning unit FX2N-10PG
Servoamplifier MR-J3-A and MR-J3-T
Dimensions(WxHxD) mm 75x45x52 75x45x52
244 x 46.5 x 52.5 110 x 62 x 45
Order information Art. no.
149148 149023
in preparation in preparation
Connection cables
Connection cable:
MR-J2TBL05M; length 0.5 m; Art.-Nr.: 61216,
MR-J2TBL1M; length 1 m; Art.-Nr.: 61218
Connection cable:
MR-J2M-CN1TBL05M0; length 0.5 m; Art.-Nr.: 146794
MR-J2M-CN1TBL1M; length 1 m; Art.-Nr.: 189864
2018
16
14
12
10
8
6
4
2
/// BATTERY, SPECIAL CABLES AND TERMINAL BLOCKS
왎 Battery Connection Relay Cable
This relay cable is used to hold the abso-
lute value if the servo amplifier has to be
removed from a machine for shipping. The
servo motor does not have a super capaci-
tor (for holding an absolute value for short
time) in the encoder. When this optional
cable is used, the absolute value can be
held even when the encoder cable is dis-
connected from the servo amplifier, mak-
ing it easy to do maintenance on the servo
amplifier.
Cable
Application
Art. no.
MR-J3BTCBL03M
Buffering absolute
value
160327
왎 Diagnostic Cable
This cable is required when using the
amplifier diagnostic function of
MR -Configurator (Setup software).
Can be used only in combination with an
MR-J3-A servo amplifier.
Cable
Application
Art. no.
MR-J3ACHECK
MR-Configurator
diagnostic function
161577
30
MR-J3-Super 2008 UK-neu.prn
MR-J3-Super 2008 UK
Montag, 21. April 2008 13:34:03
Farbprofil: Deaktiviert
Komposit Standardbildschirm