Specifications

ManualsBrandsMitsubishi ManualsAir ConditionerCity Multi PMFY-P.VBM-E

Specifications

Note:

1. The cooling and heating capacites are the maximum capacites that were obitained by operating in the above air conditions and with a refrigerant pipe of about 7.5m.

2 .The actual capacity characteristics vary with the combination of indoor and outdoor units. See the technical infomation.

3 .The operating noise is the data that was obitained by measuring it 1.5m from the the bottom of the unit in an anechoic room. (Noise meter A-scale value)

4 .The figure of Electrical characteristic indicates at 240V 50Hz/230V60Hz (PEFY-P80, 140VHM-E-F type), at 220Pa setting at 415V (PEFY-P200, 250VMH-E-F type).

5 . When the 100% fresh air indoor units are connected, the maximum connectable indoor units to 1 outdoor unit are as follows

Power source

Cooling capacity

Heating capacity

Power

consumption

Current

External finish

Dimension

H ✕ W ✕ D

Net weight

Heat exchanger

Fan

Motor

Air filter (option)

Refrigerant

pipe diameter

Field drain pipe diameter

Sound pressure level

(Lo-Mid-Hi) ❇2

Gas

(Flare)

Liquid

(Flare)

208, 220V

230, 240V

208V

220V

230V

240V

Type

✕ Quautity

Airflow rate

External

static

pressure

(Lo-Mid-Hi)

Type

Output

Cooling

Heating

Cooling

Heating

BTU/h

mm(in.)

kg(lbs.)

/min

L/s

cfm

mm(in.)

dB(A)

❇1

PEFY-P80VMH-E-F PEFY-P140VMH-E-F

9.0

30,700

8.5

29,000

0.16 / 0.21

0.67 / 0.91

380 ✕ 1000 ✕ 900

(15 ✕ 39-3/8 ✕ 35-7/16)

50 (111)

Sirocco fan ✕ 1

9.0

150

35 - 85 - 170

40 - 115 - 190

50 - 130 - 210

80 - 170 - 220

0.09 (at 220V)

27 - 38 - 43

33 - 43 - 45

16.0

54,600

15.1

51,500

0.29 / 0.33

1.24 / 1.48

380 ✕ 1200 ✕ 900

(15 ✕ 47-1/4 ✕ 35-7/16)

70 (155)

Sirocco fan ✕ 2

18.0

300

636

35 - 85 - 170

50 - 115 - 190

60 - 130 - 220

100 - 170 - 240

0.14 (at 220V)

28 - 38 - 43

34 - 43 - 45

1-phase 220-240V 50Hz / 1-phase 208-230V 60Hz

Galvanized

Cross fin (Aluminum plate fin and copper tube)

1-phase induction motor

Synthetic fiber unwoven cloth filter (long life)

ø15.88 (ø5/8)

ø9.52 (ø3/8)

O.D.32 (1-1/4)

Power source

Cooling capacity

Heating capacity

Power

consumption

Current

External finish

Dimension

H ✕ W ✕ D

Net weight

Heat exchanger

Fan

Motor

Air filter (option)

Refrigerant

pipe diameter

Field drain pipe diameter

Sound pressure

level ❇2

Gas

(Flare)

Liquid

(Flare)

380V

400V

415V

380V

400V

415V

Type

✕ Quautity

Airflow rate

External

static

pressure

Type

Output

Cooling

Heating

Cooling

Heating

BTU/h

mm(in.)

kg(lbs.)

/min

L/s

cfm

mm(in.)

dB(A)

PEFY-P200VMH-E-F PEFY-P250 VMH-E-F

22.4

76,400

21.2

72,300

0.34 / 0.42

0.58 / 0.74

467

989

140 / 200

150 / 210

160 / 220

0.20

ø19.05 (ø3/4)

39 / 42

40 / 43

40 / 44

28.0

95,500

26.5

90,400

0.39 / 0.50

0.68 / 0.86

583

1236

110 / 190

120 / 200

130 / 210

0.23

ø22.2 (ø7/8)

40 / 44

40 / 45

41 / 46

3N~ 380-415V 50Hz / 3N~ 380-415V 60Hz

Galvanized

470 ✕ 1250 ✕ 1120

(18-9/16 ✕ 49-1/4 ✕ 44-1/8)

100 (221)

Cross fin (Aluminum plate fin and copper tube)

Sirocco fan ✕ 2

3-phase induction motor

Synthetic fiber unmoven cloth filter (long life type)

ø9.52 (ø3/8)

O.D.32 (1-1/4)

6. Operational temp range is

Cooling : from 21˚C(70˚F)DB/15.5˚C(60˚F)WB to 43˚C(109˚F)DB/35˚C(95˚F)WB

Heating : from -10˚C(14˚F)DB to 20˚C(68˚F)DB

❇ Thermo off(Fan) operation automatically starts either when temperature is lower than 21˚C(70˚F)DB in cooling mode or when the temperature exceeds 20˚C(68˚F)DB in heating mode.

7. As the room temp in sensed by the thermo in the remote controller or the one in the room, be sure to use either remote controller or room thermo.

8. Autochangeover function or Dry mode is NOT available. Fan mode operation during the thermo off in Cooling/Heating mode.

9. In any case, the air flow rate should be kept lower than 110% of the above chart. Please see "Fan curves" for the details.

10. When this unit is used as sole A/C system, be careful about the dew in air outlet grilles in cooling mode.

11. Un-conditioned outdoor air such as humid air or cold air blows to the indoor during thermo off operation.

Please be careful when positioning indoor unit air outlet grilles, ie take the necessary precautions for cold air, and also insulate rooms for dew condensation prevention as required.

12. Air filter must be installed in the air intake side. The filter should be attached where easy maintenance in possible in case of usage of fild supply filters.

13. Long life cannot be used with Hi-efficiency filter together (PEFY-P80

140VMH-E-F type).

Heat pump models

110%(100% in case of heating below-5˚C(23˚F))

Cooling only

110%

()

Specifications

Page56

Specifications

Fresh Air can be taken in with temperature control.

Ideal for Offices, Stores and Restaurants.

The Fresh Air intake indoor unit

can be installed in any place.

The Fresh Air intake indoor unit can take

fresh outdoor air into any building in any

place at any time.

* Limits of capacity connectable to outdoor unit

Max. 110% of outdoor unit capacity, excepting heating at outdoor temperature of less than -5˚C(23˚F) (100%).

Office, Lobby, Workshop,

Rest room, Nursing home,

Smoking corner,

Kitchen in restaurant

Fresh Air intake indoor unit

Fresh

air

Supply air

Exhaust

air

Installing fresh Air intake indoor unit (Image)

Example

2. Workshop1. Nursery home

Fresh Air intake

indoor unit

Fresh Air intake

indoor unit

Workshop

Office

Private room

Passage

Air flow

Ventilating fan

Private room

Fresh air

Polluted air

Exhaust

air

Ventilating fan

INDOOR UNIT

Fresh Air Intake Type

PEFY-P VMH-E-F

< Note>

Fan remains in operation during Thermo-OFF. Using this model with other type of indoor

unit is recommended to prevent cold draft which is caused due to intaken fresh air.

Fresh

Air Intake

Page55

Indoor unit