Specifications

Up to 150 units can be controlled by AG-150A.*
*Expansion controller is required.
Effective use of TG-2000A
Multiple air conditioning charges in multiple buildings can be calculated. The power apportionment percentage
data and apportioned power rate can be calculated for each unit, and can be output as a CSV file.
For example, installing TG-2000A to the system in the headquarters makes it possible to control AG-150A/G(B)-
50A units that are used in branch offices.
Integrated centralized control software TG-2000A
Example of Basic System Configuration
The air-conditioning layout can be displayed
on the screen, making control and operation
easier.
Page34
Remote Controller
Dimension: 200(W) x 120(H) x 45(D) mm
: 7-7/8(W) x 4-3/4(H) x 1-13/16(D) in.
No more PLCs are needed!
Our new DIDO controller makes it possible to control
general-purpose equipment without PLC, which is cost
saving.
Up to 6 general-purpose equipment can be connected to
the DIDO controller.
*24 VDC power needs to be provided on site.
Centralized
Remote Controller
System Structure
DIDO Controller PAC-YG66DCA
DIDO controller
Security card reader
AC of other companies
Lights
Dimension: 200(W) x 120(H) x 45(D) mm
: 7-7/8(W) x 4-3/4(H) x 1-13/16(D) in.
Our new AI controller makes it possible to monitor the
values measured by the temperature/humidity sensor
connected to the AI controller.
The AI controller has two input and two output channels.
*24 VDC power needs to be provided on site.
System Structure
Remote monitoring via a
Web browser
AI Controller PAC-YG63MCA
AI controller
Temperature sensor
Humidity sensor
General-purpose equipment Control
Enables to control and monitor equipment other than air-conditioners (air-conditioners of other companies,
lights, ventilators, etc.)
• In addition to above, the air-
conditioners can be interlocked with
general-purpose equipment.
E.g. Interlock between indoor units
and security system.
• The indoor units can be turned
ON/OFF when the security system
is activated/deactivated.
Temperature/Humidity Monitoring
Monitors the values measured by the temperature/humidity
sensor connected to the AI controller
• Trend displays of measurement data can be shown on a Web browser.
• An alarm can be output by e-mail when measurement data exceeds a preset upper or lower limit.
M-NETLAN
M-NETLAN
Temperature : Pt100, 4 to 20mA DC, 1 to 5 VDC, 0 to 10 VDC
Humidity : 4 to 20mA DC, 1 to 5 VDC, 0 to 10 VDC
Icon display (Lights)
ON OFF Error Schedule set
AG-150A
AG-150A
Page33
Remote Controller