Diamondback BV-FF Ball Valve Product Sheet

Model numbers:
BV14FFSI2
BV38FFSI2
BV12FFSI2
BV58FFSI2
• Size available: 1/4”; 3/8”; 1/2”; 5/8”
• Fully factory assembled
• Single piece “Unibody” design to eliminate
most welded joints
• Furnace brazed and pressure tested
• Each ball valve is equipped with Schrader Valve
for refrigerant service—valve rated to 700 psi
• Design working pressure: 700 PSIG
• Temperature range:
-40˚ F to +325˚ F (-40˚ C to +149˚ C)
• Forged brass body and seal cap
• Teflon
®
seals and gaskets (no synthetic O-rings)
• Seal cap design permits valve operation without
removal of seal cap
• Suitable for use with R-11, R-22, R-123, R-125,
R-134A, R-236FA, R-4202A, R-402B, R-404A,
R-407C, R-410A, R-500, R-502, and R-507
• One year limited materials and workmanship
warranty on Ball Valves
• All components produced and aseembled
completely in the U.S.A.
• Engineered for Mini-split and
Multi-split HVAC Units
• Full Port Design
• 700 PSIG Rated
• R410A Compatible
• Flare Connections
continue for insulation specifications and accessories u
LISTED 891N
REFRIGERANT
VALVE
C US
B
A
C
D
E
1/4" SAE MALE FLARE
W/ACCESS FITTING PER ARI 720
(INCLUDES VALVE CORE AND SEAL CAP)
.74 FLAT
WIDTH
SAE MALE FLARE
SAE FEMALE FLARE
(SWIVEL NUT)
PART SAE A B C D E ØF
NUMBER FLARE
BV14FFSI 1/4" 6.26 2.67 1.81 1.23 1.42 1.10
BV38FFSI 3/8" 6.30 2.67 1.81 1.23 1.42 1.10
BV12FFSI 1/2" 6.51 2.67 1.81 1.23 1.42 1.10
BV58FFSI 5/8" 6.64 2.67 1.81 1.23 1.42 1.10
ØF
BV-FF Series Unibody
Design Ball Valves
Part Number
SAE
Flare
A B C D E F
BV14FFSI2 1/4" 6.26 2.67 1.81 1.23
1.42 1.10
BV38FFSI2 3/8
"
6.30 2.67
1.81 1.23
1.42 1.10
BV12FFSI2 1/2
"
6.51 2.67
1.81 1.23
1.42 1.10
BV58FFSI2 5/8
"
6.64 2.67
1.81 1.23
1.42 1.10
*ball valves come with an insulation piece