Specifications

CNTR-60
CONTROLLER (Feb. 2009)
CONTROLLER
DATA U4
3-14. PLC software for demand input [PAC-YG41CDA]
MITSUBISHI ELECTRIC's CITY MUL TI
®
has its intelligent wa y to carry out peak-cut control while maximizing the air condition-
ing effect.
- Energy saving setting
- Monitoring of current energy saving
state
The registration of
energy saving control
or peak cut control is
necessary.
- Set temperature control (
- Fan (thermostat OFF) control
- Stopping control
PC for TG-2000A
AG-150A
Collects daily
power
consumption
Collects current
daily consumption
(every per minute)
License
PLC
(Pulse counting
software installed)
PAC-YG11CDA
PLC
(PLC software
for demand input)
Requires to execute the peak cut control.
Either method should be used.These methods cannot be used together.
Counts for electric power pulse
Watt-hour
meter
If the quantity of G-50A exceeds 11 sets, one set of PLC is required
for each 10 sets of PLC.
or
Contact input (4 levels max.)
Demand
controller
System example
Name (Model name)
PC for central control
TG-2000A
G-50A/GB-50A
Energy saving control (peak cut) license
Web monitor license
Maker
PC/AT convertible unit
MITSUBISHI ELECTRIC
MITSUBISHI ELECTRIC
MITSUBISHI ELECTRIC
MITSUBISHI ELECTRIC
Remarks
Confirmed operation of IBM, DELL, Hp Compaq.
For details, refer to G-50A Technical Manual.
Use Ver.4.6 or later.
Use Ver.2.6 or later.
Requires for each AG-150A/G-50A/GB-50A.
Requires for each AG-150A/G-50A/GB-50A.
Necessary parts f
or the system
.
CENTRALIZED CONTROLLER AG-150A
- Capacity saving control
(60/70/80/90%)
3. SYSTEM CONTROLLER
3-14. PLC software for demand input [PAC-YG41CDA]