Specifications

CONTROLLER (Feb. 2009)
CNTR-5
CONTROLLER
DATA U4
Cntr- 5
2. Local remote controller
DATA U3
CONTROLLER
2-2. ME remote controller [PAR-F27MEA-US]
Functions
System example
:Each unit
:Collective
:Each block:Each group
:Each floor:Not available
Functions
External dimension
ON/OFF
Run and stop operation for a single group
Operation mode
switching
Switches between Cool / Dry / Auto / Fan / Heat.
Operation modes vary depending on the air conditioner unit.
Te mperature
setting
Sets the temperature for a single group
Range of temperature setting
Fan speed
setting
Models with 4 air flow speed settings: Hi/Mid-2/Mid-1/Low
Models with 3 air flow speed settings: Hi/Mid/Low
Models with 2 air flow speed settings: Hi/Low
Air flow
direction
setting
Permit / Prohibit
local operation
Individually prohibit operation of each local remote control
function (Start/Stop, Change operation mode, Set
temperature, Reset filter).
1: When the local remote controller inactivation command
is received from the master system controller, "-
CENTRALLY CONTROLLED -" is displayed.
Timer operation
Thanks to the three timer modes equipped, a proper mode
can be selected to meet the usage.
One day timer : ON/OFF setting of one time on one day can be applied.
Daily timer : ON/OFF setting by the One day timer can be repeated for
everyday.
Auto OFF timer : OFF timer can be set in a range from 30 minutes to 4 hours.
Setting of Auto OFF timer automatically activates OFF timer at the next operation.
This function can be utilized to prevent the negligence of OFF setting.
Weekly schedule in only one patterns can be employed by connecting Program timer.
Indoor unit intake
temperature
Measures the intake temperature of the indoor unit when
the indoor unit is operating.
Error
When an error is currently occurring on an air conditioner
unit, the afflicted unit and the error code are displayed.
Test run This operates air conditioner units in test run mode.
Item
Description
Operations Display
Air flow direction angles 100% - 80% - 60% - 40%, Swing,
Louver ON/OFF
Air flow direction settings vary depending on the model.
Function to limit
the setting range
of room
temperature
(Set temperature
range limit)
The range of room temperature setting can be limited by the
initial setting.The lowest limit temperature can be made higher
ying, while the upper
limit temperature lo
When making the function to limit room temperature setting range
effective, the operation mode cannot be set to the auto mode.
Setting/releasing of simplified locking for remote control
switch can be performed.
· Locking of all switches
· Locking of all switches except Start/Stop switch
Easy-to-operate
simplified locking
function
(Auto lock function)
2
SET TEMP.
1
TIMER SET
AIR DIRECTION
VENTILATION LOUVER
FAN SPEED
TIMERMODE
OFF
ON CLOCK
TEST
CHECK
FILTER
PAR-F27MEA-US
ON/OFF SET TEMP.
Three timer modes are available with its enhanced
timer function.
The room temperature can be limited by the initial
setting. By setting the room temperature range
narrower than usual setting, cooling/heating oper-
ation with excessive temperature can be prevent-
ed and thus save energy.
Allows for simple “button locking” function.
ME
remote
controller
ME
remote
controller
(Front view)(Side view) (Rear view)
Unit:
mm[in.]
Auto mode is only for the CITY MULTI
®
R2- and WR2-Series.
Cool/Dry:
Heat
:
Auto :
( ) For PDFY/PEFY/PFFY by setting Dip SW 7-1 to ON and limits to HIGH fan speed only.
[4- ]
23
/
32
[5- ]
1
/
8
3
/
4
[1- ]
13
/
16
[3- ]
9
/
32
120
130
19
[ ]
46
83.5
2. LOCAL REMOTE CONTROLLER
2-2. ME remote controller [PAR-27MEA-US]