Specifications

CONTROLLER (Feb. 2009)
CNTR-35
CONTROLLER
DATA U4
3. SYSTEM CONTROLLER
WhenusingtheLANconnectionfunction,connecttheLANcabletothe
LANconnectorofthisdevice.
ProcuretheLANcableatthesite,anduse100BASE-TXStraightcable.
ForadescriptionoftheIPaddresssettingmethod,refertoInstructionBook.
LANis100BASE-TXSpecification.
3-6-3. LAN connection function
PerformtheLANwiringbeforeinstallation,andwireuptothebodybythesamemethodaswiringtheM-NET
transmission line.
WhenaLANisalreadyconnected,decidetheIPaddressbyconsultationwiththesystemadministratorand
connecttotheLANbodyafterchangingtheIPaddress.
Connect AG-150Atoaprivatenetwork.
LAN
NOTE