User`s manual

5.2 Example of Parameter Settings with GX Developer (Remote net ver.2 mode)
This section explains the parameter settings using the GX Developer. For more details on the GX
Developer operation, refer to the GX Developer Operating Manual. The explanations in this section are
based on the following example of the system configuration.
(9/n)
LEN130391
5.2.1 Master Station Network Parameter Settings
1) Double-click on the “Network param”.
2) Double-click on the “CC-Link” on the “Network parameter” screen.
3) Set the parameters as required.
The follwing describes an example of the parameter settings.
Master station
(X00 to X1F)
(Y00 to Y1F)
ME96
(occupies
1 station)
Octuple
ME96
Station number 1 Station number 2
(occupies
1 station)
Octuple
1)
2)
3)