User`s manual

4. Programming

4.1 Programming Procedure

Create a program which executes the “Monitoring of the measurement valus” by following the procedure

below:

START

Parameter setting

Selecting Commands

Initial Communication

Normal Communication

Error Communication

Set the CPU parameter to start the data link.

(Refer to Secti

on 5)

Convert the data

Convert the measurement data using the effective range

and multiplying factor. (Refer to Table 7.22)

Select the command to transmit to the ME96.

(Refer to Section 0)

Initialize the ME96.

(Refer to Section 6.2)

Transmit and receive the command to monitor the

measurement value. (Refer to Section 6.4,Section 0)

In nesessary

Required

Check the error status flag and error code.

(Rerer to Section 6.3, Section 7.2.6)

Required

End

(7/n)

LEN130391