Specifications

CC-Link
AJ65BT-D62, AJ65BT-D62D
AJ65BT-D62D-S1 Remote High Speed Counter
●
Up to 400kpps counting (differential type)
●
Two coincident outputs per channel
●
Four special counting functions
Ring counter, latch counter, periodic pulse counter, count disable
AJ65BT-D75P2-S2 Remote Positioning Module
●
2 axes positioning control with linear or circular interpolation
●
Pulse train output for either stepper or servo amplifier
●
32 bit positioning range
●
Up to 1Mpps positioning speed (differential output type)
●
Electronic gear function
■ Specifications: Remote high speed counter
Model AJ65BT-D62 AJ65BT-D62D AJ65BT-D62D-S1
Counter mode High speed Low speed High speed Low speed High speed Low speed
Number of channels 2 2 2
Input phase Single phase or dual phase
Maximum speed
1 φ : 200kpps 1 φ : 10kpps High speed mode: 1 φ : 400kpps, 2 φ : 300kpps
2 φ : 200kpps 2 φ : 7kpps Low speed mode: 1 φ : 10kpps, 2 φ : 7kpps
Minimum pulse width
1 φ : 2.5/2.5µs1 φ : 50/50µs High speed mode: 1 φ : 1.25/1.25µs, 2 φ : 1.65/1.65µs
2 φ : 2.5/2.5µs2 φ : 71/71µs Low speed mode: 1 φ : 50/50µs, 2 φ : 71/71µs
Count range 24 bit, 0 to 16,777,215
Count input 5/12/24VDC RS422A
Preset input Rated voltage: 5/12/24VDC RS422A
Number of output: 2 points/channel
Output type: Transistor (sink)
Coincident output Rated voltage: 24VDC (10.2 to 30VDC)
Rated current: 0.5A/point
Response time: 0.1ms
Remote I/O type Remote device
Occupied station numbers 4
Power supply 24VDC/70mA 24VDC/100mA 24VDC/120mA
■ Specifications: Remote positioning module
Model AJ65BT-D75P2-S2
Number of axes 2 axes
Positioning specifications Same as A1SD75P2-S3, please refer to page 27
Remote I/O type Remote device
Occupied station numbers 4
Power supply 24VDC/0.3A
41
RyansElectric.com