Specifications

Positioning Modules
■
AD75P1-S3, AD75P2-S3, AD75P3-S3
AD75M1, AD75M2, AD75M3
Positioning modules
The AD75 Series of modules represents the combination of
Mitsubishi’s technological expertise in the manufacture and
design of CNC, Inverter, Servo and PLC systems. These
modules provide a plethora of functions which satisfy the
requirements of even the most demanding of positioning
applications.
■
Up to 3-axes operation
The module controls up to three axis operations yet
occupies only one slot size making it economical for
motion control applications. Types of modules provided
are:
1 axis - AD75P1-S3, AD75M1
2 axes - AD75P2-S3, AD75M2
3 axes - AD75P3-S3, AD75M3
■
Increased positioning data memory
Number of positioning data per axis is increased to 600
from 400 of AD71. In addition, the data is stored in flash
ROM so that no battery is required.
■
S-curve acceleration/deceleration
The S-curve acceleration/deceleration function enables
smoother start and stop, and reduces stress on machines.
Up to 4 different acceleration and deceleration times can
be defined, and used for each positioning operation.
■
Interpolation
Linear and circular interpolation can be operated with any
combination of two axes.
■
Variety of original point return method
Six types of original point return methods are provided
allowing greater flexibility of machine design and
configuration. Automatic original point return function
enables the machine to return to the original point from
anywhere within the hardware stroke limit.
■
Positioning modules
■
Open-collector or differential driver
Either open-collector transistor or differential driver output
can be selected to meet the motor amplifier's specifications.
When using differential driver output, up to 400k pps can
be transmitted as far as 30m (98.4 ft).
■
AD75TU, teaching unit
AD75TU, teaching unit is a handy programmer for AD75
Series modules. Monitoring of positioning status, JOG,
teaching, test, and parameter and positioning data input can
be carried out with this unit.
■
Extensive functions
AD75 has other very useful functions which include:
●
Unit selection of mm, inch, degree, or pulse
●
Electronic gear
●
Step operation/ Skip operation
●
Teaching
●
Override speed
●
Velocity control
■
AD75M, SSC net compatible controller
SSC Net is Mitsubishi’s Servo System Control network. With
this network, MR-H-B, MR-J-B and MR-J2 servo amplifier
are connected to a controller through the network system
instead of pulse train or voltage signals.
SSC Net system gives the following advantages:
●
Up to 30m (98.4 ft) distance between an AD75M and an
amplifier
●
Amplifier parameter can be down-loaded from AD75M
●
Amplifier’s internal data can be monitored
●
Possible to configure absolute systems
21
RyansElectric.com