User`s manual

1
1. Introduction
This user's manual gives specifications, handling instructions and other
information of the A8GT-TK Numeric Keypad Panel (hereafter referred to as the
"Numeric Keypad Panel").
First, please refer to the user's manual of the A9GT-70KBF/A8GT-
70KBF/A8GT-50KBF external I/O module (hereafter referred to as the "external
I/O module") being used.
The Numeric Keypad Panel is designed to be mountable onto a control box or
the like. It is connected to the external I/O module or terminal block conversion
module as a data entry Numeric Keypad Panel dedicated to the GOT900 series
/GOT800 series (hereafter referred to as the "GOT").
GOT
A8GT-TK
External I/O
interface module
Restrictions on use
y
Do not press two or more switches of the Numeric Keypad Panel at the
same time.
Pressing two or more switches simultaneously can cause mis-input.
y
When setting any operation to each key of the Numeric Keypad Panel on
the GT Designer or the SW3NIW-A8GOTP graphic settings software
package, re-set the default key code of each key to “FFFF”.
Otherwise, operation setting will be invalid.
Performance Specifications
Connection interface A9GT-70KBF/A8GT-70KBF/A8GT-50KBF
Application Data entry from keyboard
Number of keys 31
Key makeup
Function keys, cursor keys, ten-key pad,
other function keys
Keyboard
Operational life 200,000 times
Online
connection/disconnection
Disallowed
Outline dimensions(mm/inch)
197/7.76(H)
×
70/2.76(W)
×
15/0.59(D)
Weight(kg/lb) 0.13/0.29
For general specifications, refer to the user's manual of the GOT used.