User`s manual

11
5. Installation
When installing the Numeric Keypad Panel on a control box door, mount or the
like, the door or mount must be machined.
The following diagram shows mounting panel machining dimensions.
Mounting panel machining dimensions (front view)
25{0.98}
25.5
{1.0}
172{0.77}
45{1.77}
2-
f5
79{3.11}
32.75{1.29}
Square
hole
(13.75)
{0.54}
{0.61}
(15.5)
Unit:mm{inch}