User`s manual

3
(2) System equipment
The following table indicates the system equipment needed for
connection of external I/O equipment.
Type
Image No. Applicatin
GOT unit
External I/O
interface module
A985GOT,
A97*GOT,
A960GOT
A9GT-70KBF
A870GOT,
A810GOT
A8GT-70KBF
External I/O equipment-connected
GOT
A956WGOT,
A95*GOT,
A85*GOT
A8GT-50KBF
Numeric keypad panel A8GT-TK
Connector terminal block conversion
unit*1
A6TBY36-E, A6TBY54-E
Connection cable between [GOT]
and [numeric keypad panel]*1*2
A8GT-C05TK(0.5m)
Connection cable between [GOT]
and [connector terminal block
conversion unit]*1*3
A8GT-C30TB(3m)
Connection cable between
[connector terminal block conversion
unit] and [general-purpose I/O
equipment]*4
Fabricate on user side
Connection cable between
[connector terminal block conversion
unit] and [numeric keypad panel]
(Refer to Section 3.2 and
fabricate on user side.)
*1 12/24VDC power must be supplied for external I/O units.
*2 The connection cable may also be fabricated on user side.
Refer to Section 3.1 for details of the fabricating method.
*3 The connection cable may also be fabricated on user side.
Refer to the following manuals for details of the fabricating method.
GOT used Manual Name
When the GOT-A900
Series is used
GOT-A900 Series User’s Manual (GT Works Version5/GT
Designer Version5 compatible Connection System Manual)
When the GOT800
Series is used
A8GT-50KBF type External I/O interface module User’s
Manual
*4 The connection cable must be prepared by the user.
Refer to *3 manual for details of the fabricating method.