Specifications

[Issue No.] GOT-A-0018-G [Page] 24/27
[Title] Precautions when Replacing GOTA800, A77GOT, A64GOT Series with GOT1000 Series
[Date of Issue] Ver.G: September 2011 (First Edition: September 2005)
[Relevant Models] GOT800, A77GOT, and A64GOT Series
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN
TECHNICAL BULLETIN
7.2.2 Monitor screen data compatibility between GOT800 series and GOT1000 series
(1) Precautions for compatibility
When converting GOT800 series data into GOT1000 series data, the compatibility is basically upward.
However, some functions require changes of sequence programs or drawing data.
The following shows the functions that require changes of sequence programs or drawing data.
Table 7-2 Functions that require changes in sequence programs and drawing data
Item Description
Procedures for replacing GOT800 series with GOT1000
series
When [Display Mode] is set to [XOR], the parts that group
superimposed figures are displayed as follows:
GOT800 series : The grouped figures are displayed at
once by using the XOR display.
GOT1000 series: Each in the grouped figures is
displayed individually in order of the
superimposed figures by using the
XOR display.
When [Display Mode] is set to [XOR] with the GOT800
series, if the same color is set for the line color and the
pattern color with the pattern type 8 (fill), the outside of
the part is displayed in one-dot smaller size with the
GOT1000 series.
Configure the auxiliary setting in the system environment
so that the grouped figures are displayed at once by using
the XOR display.
When [Display Mode] is set to [XOR] with the GOT800
series (16-color model), if the converted data is displayed
with the GOT1000 series (16-color model), the
superimposed section of a figure and a part is displayed
with a dark color. (The display color setting is adjusted to
that of the GOT1000 series 65536-color models.)
<Example>
No change in the setting is required when the dark color is
used for the superimposed section.
When the dark color is not used for the superimposed
section, set the part to dark color.
(Either the part color or the superimposed section color is
always set to dark color.)
<GOT1000 series colors corresponding to the left
example>
GOT
Figure
color
Part
color
Superim
posed
section
color
GOT
Figure
color
Part
color
Superim
posed
section
color
GOT800 series
(16 colors)
Blue White Yellow
GOT1000 series
(16 colors)
Blue White Dark
yellow
GOT1000 series
(65536 colors)
Blue White Yellow
GOT1000
series
(16 colors)
Blue
Dark
white
Yellow
Parts display
Parts movement When [Indirect] is set for [Parts indication] with the parts
movement function of the GOT800 series, if the device
value is a negative value or is outside the display range,
the parts are displayed as follows:
GOT800 series: The parts are not displayed.
GOT1000 series: The parts are displayed.
When [Indirect] is not set with the parts movement function,
the display contents have no difference between the
GOT800 series and the GOT1000 series. Even if [Indirect]
is set, the display contents have no difference between the
GOT800 series and the GOT1000 series unless the device
value is a negative value or outside the display range.
Please make the part number "0" when the device value
becomes a negative numerical value, and it becomes
outside "Display range" and set outside "Display range".
(Parts are not displayed by making the number of "Display
parts" "0". )