Specifications

[Issue No.] GOT-A-0018-G [Page] 20/27
[Title] Precautions when Replacing GOTA800, A77GOT, A64GOT Series with GOT1000 Series
[Date of Issue] Ver.G: September 2011 (First Edition: September 2005)
[Relevant Models] GOT800, A77GOT, and A64GOT Series
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN
TECHNICAL BULLETIN
7.1.2 How to convert monitor screen data from A77GOT series to GOT1000 series
The monitor screen data for the A77GOT series can be converted into GOT800 series data by using the
GOT800 series drawing software SW3NIW-A8GOTP. Then, the GOT800 series data can be converted into
GOT1000 series data by using the data conversion software (GT Converter2 Version□).
(1) When you have the monitor screen data for the A77GOT series
After the monitor screen data for the A77GOT series is converted into GOT800 series data by using the
GOT800 series drawing software SW3NIW-A8GOTP, convert the data into GOT1000 series data by using
GT Converter2 Version□.
1) Prepare the GOT screen data.
2) By using the W3NIW-A8GOTP, convert the data into GOT800 series data.
Select [Project] – [Import File] – [AGOTP Data] from the menu on the A8GOTP.
The data is read as the GOT800 series data.
3) Save the data by selecting [Project] –[Save As] from the menu.
4) Convert the data into GOT1000 series data by using GT Converter2 Version□.
→ Refer to Section 7.1.1 (1).
(2) When you do not have the monitor screen data for the A77GOT series
Upload the monitor screen data from the A77GOT, and then convert the data.
Note that uploading is available when the following conditions are satisfied.
- The GOT is the A77GOT-S5.
- The GOT type is set to [A77GOT-S5] in the data.
Uploading is not available with the models other than the A77GOT-S5. Use data stored in the personal
computer or floppy disk, or create screen data for the GOT1000 series.
To upload the monitor screen data from the A77GOT, the A77GOT drawing software
(SW2SRX-AGOTP/SW2IVD-AGOTP/SW2NX-AGOTP) is required.
1) Upload the monitor screen data from the A77GOT-S5, and save the data.
2) After the data is converted into GOT800 series data by using the SW3NIW-A8GOTP, convert the data
into GOT1000 series data by using GT Converter2 Version□. → Refer to Section 7.1.2 (1).