User`s manual

2
3. Specifications
Input Specifications
Input system Dynamic scan
Number of input points 8/64 points
Isolation system Photocoupler isolation
Rated input voltage 12VDC 24DVC
Rated input current Approx. 4mA Approx. 9mA
Operating voltage range 10.2 to 26.4VDC (ripple percentage within 5%)
Max. number of
simultaneous input points
100% simultaneous ON (at 26.4VDC)
ON voltage/ON current 8VDC or more/2mA or more
OFF voltage/OFF current 4VDC or less/1mA or less
Input resistance
Approx. 2.4K
Ω
ON to OFF Approx. 0.4ms or less (24VDC)
Response
time *1
OFF to ON Approx. 0.4ms or less (24VDC)
Dynamic scan cycle 13.3ms
Output Specifications
Output system Direct
Number of output points 16 points
Isolation system Photocoupler isolation
Rated load voltage 12/24DVC
Max. load current*4 0.1A/1 point
Operating load voltage
range
10.2 to 26.4VDC (ripple percentage within 5%)
Max. inrush current 0.4A
Leakage current at OFF 0.1mA or less
Max. voltage drop at ON 2.5VDC (0.1A)
ON to OFF 2ms or less
Response
time*1
OFF to ON 2ms or less (resistive load)
Surge suppressor Clamp diode