Specifications

ManualsBrandsMitsubishi ManualsComputer equipmentA8GT-50KBF

P.30

Options

P.32

P.42

P.34

P.50

A975GOT

A970GOT

A960GOT

Works2

A985GOT-V

A985GOT

A956WGOT

P.6

P.4

P.2

P.8

P.10

P.12

P.16

P.18

P.20

P.22

P.24

P.26

P.28

P.38

P.52

P.54

P.56

P.59

P.62

P.58

Concept Lineup

Special report

FA integrated functions

SoftGOT2

Special report

New drawing software

Special report

Gateway functions

Features and

recommended points

A95 GOT

GOT

dictionary

Connection

configuration

Bus

connection

Specifications

External

dimensions

Function list

for each model

Connectable

model list

Notes

for use

List of

products

Sales &

service network

32 33

Applicable models

Used to display Video images on the GOT.

Supports up to 4 channels.

Used to input Video or RGB signals to the GOT. These two

inputs cannot be displayed at the same time.

•Video input function: Supports up to 4 channels.

•RGB input function: Supports 1 channel (SVGA, VGA).

Used to display RGB signal on the GOT.

Supports VGA and SVGA.

Applicable models

Use this sheet to protect the GOT screen (A set of 5 sheets).

The logo on the protection sheet can be removed. (The GOT unit

has no logo printed.)

*The HMI is supplied with a protection sheet.

Used to replace the A77GOT or GOT800 series with the GOT-A900

series. If an attachment is used, the installation opening does not need to

be changed.

Model name

Conventional models

Replaceable models

A77GT-96ATT

A85GT-95ATT

A87GT-96ATT

A87GT-97ATT

A960GOT

A95 GOT(-M3)

A960GOT

A97 GOT(-B)

A77GOT-L, A77GOT-L-S3, A77GOT-L-S5, A77GOT-CL, A77GOT-CL-S3, A77GOT-CL-S5A85GT-95ATT

A85 GOTA87GT-97ATT

A77GOT-EL, A77GOT-EL-S3, A77GOT-EL-S5, A870GOT-EWS, A8GT-70GOT-EW, A8GT-70GOT-EB

A870GOT-SWS, A8GT-70GOT-SW, A8GT-70GOT-SB, A870GOT-TWS, A8GT-70GOT-TW, A8GT-70GOT-LB

•

The attachment can be used only when the panel thickness is 1.2 to 3 mm. If the panel

thickness exceeds 3 mm, the GOT cannot be replaced by using an attachment.

•If the GOT is replaced using an attachment, it does not comply with the waterproof

and dustproof standard, IP65F.

*7*5

*6 *6 *6

*1: A985-V only

Memory board expands the capability of optional functions such as

ladder monitor, list edition, and recipe, and GOT internal memory

(internal GOT screen data memory).

Note: choose A9GT-(Q)FNB when the optional functions and internal

memory are not required. Choose A9GT-FNB2M when the

optional functions and internal memory (2M) are required.

Refer to "List of Product" on page 60 for expansion memory board types.

Used to connect a PC card with the A95 GOT.

Functions that require the PC card interface unit are as follows:

•OS installation or screen data transfer using PC card

•Alarm history (when history data is saved)

•Screen hardcopy (when "PC card" is specified as output destination)

•Recipe (when "PC card is used" is specified)

*The PC card interface unit can use only an SRAM PC card.

*Cable between GOT and PC card interface: A85GT-C05H (50cm) (Optional.)

Used to perform input/output of the GOT or to

operate it with a keyboard. The keyboard can

be created by the customer.

See "List of Products" on page 60 for the backlights used with each

GOT.

*3: A985 only

*4: The PC card interface unit cannot be used with a compact flash PC card.

Used to store a large amount of data that cannot be saved in an SRAM

PC card. Having a larger capacity than an SRAM PC card, a single PC

card can store more data.

*2*2*2*2

*2: Built-in printer interface

Options

Various options increase your satisfaction!

*5: Only the A985GOT-V supports commercially available Flash PC card.

(Soon to be supported by the A985-GOT.)

*6:

The GOT with function number A or later supports commercially available Flash PC card.

*Commercially available Compact Flash PC card, inserted into an adopter,

can be used as Flash PC card.

*7:

The compact flash PC card cannot be used with the PC card interface unit (A1SD59J-MIF).

New

Product overview

Options

Video/RGB composite input interface unit (A9GT-80V4R1)

A985(-V)

A975 A970 A960 A95A956W

Video input interface unit (A9GT-80V4)

RGB input interface unit (A9GT-80R1)

Printer interface unit (A9GT-50PRF)

Example of hardcopy

Example of Daily/monthly

report output (form print)

PC card interface unit (A1SD59J-MIF) *For SRAM PC card only

Flash PC card

A985(-V)

A975 A970 A960 A95A956W

Memory board

Protection sheet

Backlight

Stand

This stand is used to place the GOT on a desk for debugging.

A9GT-80 STAND

........

For A985 (-V) GOT

A9GT-70 STAND

........

For A97 GOT, A960GOT

A9GT-50WSTAND

......

For A956WGOT

A9GT-50 STAND

........

For A95 GOT

Attachment

A77GOT and

GOT800 series

GOT-A900 series

The installation

opening does not need

additional processing.

There are the following types of attachments:

External input/output interface unit

Used to connect a printer with the A956W/A95 GOT.

Supports the Centronics parallel interface (20 pins, half pitch).

Functions that require the Printer interface unit are as follows:

•Alarm history print

•Daily/monthly report output (form print)

•Display screen color hardcopy

•Bitmap data output to PC card (snap shot)

See MELFANSweb home page at http://www.MitsubishiElectric.co.jp/melfansweb for available printers.