Specifications

ManualsBrandsMitsubishi ManualsComputer equipmentA8GT-50KBF

30 31

Supporting design tasks ranging from GOT screen creation to debugging

GT SoftGOT2 operating environment

Connection cable (Cable for connection between GOT and DOS/V personal computer)

•GT Designer2 cuts drawing time approximately by half compared to that of

GT Designer by using new functions, Workspace, Property sheet and etc.

The number of mouse clicks has also reduced.

•GT Designer2 offers high-performance operability including easy menu

configuration, multi language support, and more intuitive operator control.

•Screen data created on GT Designer can be used on GT Designer2 so that

the resources can be fully utilized.

Main features of GT Simulator2

The GOT-A900 series screen can be simulated on a

personal computer to debug the screen. If the screen

needs to be modified as a result of debugging, it can be

done with GT Designer2 and the result can be checked

with GT Simulator2 immediately, so debugging time

can be reduced drastically.

GT Designer is a drawing software package for all

GOT900 series, and can be used for drawing with the

GOT-A900 and GOT-F900 series.

Refer to page 59 for purchasing the GT Designer2.

Refer to page 59 for purchasing the GT Simulator2.

1. Reduction in screen drawing time by half

Windows

standard operability and menu configuration

3. Data compatibility with GT Designer

•Device value changes are displayed during simulation of a created sequence program

with GT Simulator2 and GX Simulator (ladder logic test tool).

•The device value change function of GT Simulator2 can be used to change device

values forcibly and check screen display changes.

•The input to a touch switch is simulated by clicking on the touch switch on GT

Simulator2 with the mouse.

•

The result of input to the touch switch can be confirmed by a display change on GT Simulator2,

the device monitor screen on GX Simulator, or the ladder monitor of GX Developer.

•Using GT Simulator2, base and window screens can be saved as a bitmap format.

This helps finish the complete operation manuals in short time.

•GT Simulator2 allows users to monitor images just as they appear in the software. This

incorporates users application requirements in the debugging of drawing development

and reduces editing time later.

Debugging similar to the actual image can be performed on a personal computer

2. Touch switch input simulation with a mouse

Manual document and application requirement with screen image shots

GT Designer2 GT Simulator2

GT Wo rks2

DescriptionItem

Personal computer

CPU

Required memory

Free hard

disk space

Disk drive

Display colors

Display

Others

For installation

For operation

*1: Compatibility, user account, and desktop appearance functions are not supported.

*2: Refer to the "Operation manual (compatible connection system)" for other PC connection cables.

GOT drawing software GOT simulation software

GT Works2 is an integrated screen drawing

software package containing GOT-900 series

drawing software, GT Designer2, GOT

simulation software, and GT Simulator2. The

requirements, such as drawing time reduction

and development efficiency improvement, can

be satisfied by integrating the reinforced

drawing environment for GT Designer2 and

the ultimate debugging environment for GT

Simulator2.

Integrated screen de velopment software

DOS/V personal computer applicable connector

D-SUB 9-pin female

Screwed (inch screw) type

GOT-A900 side applicable connector

D-SUB 9-pin female

Screwed (inch screw) type

AC30R2-9SS

Application ApplicationConnection diagram

Main features of GT Designer2

NEW NEW

NEW

Personal computer on which Windows

runs

Microsoft

Windows

98 operating system

Microsoft

Windows

Millennium Edition operating system

Microsoft

WindowsNT

Workstation 4.0 operating system

Microsoft

Windows

2000 Professional operating system

Pentium 200MHz or higher

64MB or more

250MB or more

50MB or more

CD-ROM disk drive

256 colors

Resolution 800 x 600 dots or more

Internet Explorer Ver. 5.0 or later must be installed.

Microsoft

Windows

XP Professional operating system

Microsoft

Windows

XP Home Edition operating system

Pentium 300MHz or higher

128MB or more

NEW

When QCPU (A mode), ACPU or motion controller CPU (A series) is simulated

When QCPU (Q mode) (except Q00J/Q00/Q01CPU), QnACPU or FXCPU is simulated

When Q00J/Q00/Q01CPU is simulated

When Q12PHCPU or Q25PHCPU is simulated

SW5D5C-LLT Version A or later

SW5D5C-LLT Version E or later

SW6D5C-LLT Version A or later

SW6D5C-LLT Version L or later

PLC

FX/A/QnA series

Q series

CPU port

RS422

RS232

Converter/cable

RS-422/RS-232C converter

QC30R2

DescriptionItem

Personal computer

CPU

Required

memory

Free hard

disk space

Disk drive

Display colors

Display

Required

software

cable

Note

GT Simulator2 only

GT Simulator2+GX Developer+GX Simulator

For installation

For operation

Required

When GX Simulator is used

When MELSEC PLC is used

Personal computer on which Windows

runs

Microsoft

Windows

98 operating system

Microsoft

Windows

Millennium Edition operating system

Microsoft

WindowsNT

Workstation 4.0 operating system

Microsoft

Windows

2000 Professional operating system

Pentium 200MHz or higher (Pentium 300MHz or higher recommended)

64MB or more (96MB or more recommended)

96MB or more (128MB or more recommended)

200MB or more

100MB or more

CD-ROM disk drive

256 colors

Resolution 800 x 600 dots or more

GT Designer2

or GT Designer

•GX Simulator of the following version is required depending on CPU.

•The following converter or cable is required to connect GT Simulator2 and MELSEC PLC.

The following GOT functions cannot be simulated. [Print functions (report, hard copy, alarm print), external input/output function, ladder monitor function,

system monitor function, special module monitor function, network monitor function, list program edit function, motion monitor function, servo amplifier monitor function]

Microsoft

Windows

XP Professional operating system

*4*5

Microsoft

Windows

XP Home Edition operating system

*4*5

Pentium 300MHz or higher (Pentium 450MHz or higher recommended)

128MB or more (192MB or more recommended)

NEW

*1: Extra free space is required when GT Simulator2 is used with the GX Developer or GX Simulator.

For the necessary free space for the GX Developer and the GX Simulator, refer to the Operating

manuals (startup/introductory) of GX Developer and GX Simulator.

*2:

Use the personal computer where Windows NT

Workstation 4.0 of Service Pack 3 or later is installed.

*3: Use GT Designer2 included in GT Works2.

*4:

Compatibility, user account, and desktop appearance functions are not supported.

*5:

Administrator authorization is required to use Windows

XP Professional or Windows

XP Home Edition.

*6: RS-422/RS-232C converter for GX Developer is required.

The monitor data created by GT Designer2 cannot be used on the conventional product (GT Designer).

Shield

GOT

RXD

TXD

RTS

CTS

DSR

DTR

RXD

TXD

RTS

CTS

DSR

DTR

SHELL SHELL

Product overview

GT Simulator2

GX Simulator GX Developer

P.30

Options

P.32

P.42

P.34

P.50

A975GOT

A970GOT

A960GOT

Works2

A985GOT-V

A985GOT

A956WGOT

P.6

P.4

P.2

P.8

P.10

P.12

P.16

P.18

P.20

P.22

P.24

P.26

P.28

P.38

P.52

P.54

P.56

P.59

P.62

P.58

Concept Lineup

Special report

FA integrated functions

SoftGOT2

Special report

New drawing software

Special report

Gateway functions

Features and

recommended points

A95 GOT

GOT

dictionary

Connection

configuration

Bus

connection

Specifications

External

dimensions

Function list

for each model

Connectable

model list

Notes

for use

List of

products

Sales &

service network

Screen development software

Dialog box

Workspace

Property sheet Library editor