User`s manual

Graphic Operation Terminal F930GOT Creation of Display Screens 8
8-7
8.1.3 Functions dedicated to screen creation software for GOT-A900
The functions shown below are dedicated to the screen creation software GOT-A900. The
functions are not supported by the F930GOT. (For the details of these functions, refer to the
operation manual of the screen creation software for GOT-A900.)
1) Screen display
Line Freeform : Displays a line indicating a zigzag or polygon in one stroke.
In the F930GOT, two or more lines can be used to display such a figure.
Polygon : Displays a polygon.
In the F930GOT, two or more lines can be used to display a polygon.
Sector : Displays a sector.
Arc : Displays an eclipse.
Scale : Displays the scale for bar graphs and panel meters
In the F930GOT, the scale function is given to bar graphs and meters.
Paint : Paints (fills) a specified area (which may be a polygon).
In the F930GOT, boxes and circles can be filled.
Data List : Displays the data list in the form of table.
Level : Displays the level within a specified image range.
In the F930GOT, the level can be expressed in the form of bar graph (box).
Part Movement : Moves displayed parts on a specified trace.
2) Printer output
Report : Outputs the data to the printer in accordance with a specified format.
Hard Copy : Outputs the display screen as it is to the printer.
3) Voice output
Voices can be output.
In the F930GOT, buzzer sounds can be issued.
4) Window screen
A window can overlay the display screen.
5) Station No. changeover
When two or more A900GOT units access the PLC, the A900GOT unit No. which is to
access the PLC can be specified.
In the case of F930GOT, up to four units can access the PLC without specifying the station
No.