User`s manual

Graphic Operation Terminal F930GOT Other Mode 6
6-2
6.2 SET TIME SWITCH
Set the time switch using the clock function built in the GOT.
This function turns on up to 8 consecutive bit devices when the specified day of the week and
the specified time have come, and keeps them ON until the end time.
Target bit devices can be specified using the screen creation software FX-PCS-DU/WIN-E.
u
uu
u
Basic operation
Day of the week:
Select desired days of the week by pressing them.
"
l
" is added to selected days of the week.
When a day of the week marked with "
l
" is pressed again, selection is canceled.
START TIME:
Set the time at which the specified bit devices become ON.
The devices will remain ON from the start time to the end time on the selected days of the
week.
END TIME:
If the end time is earlier than the start time, the specified bit devices remain ON until the follow-
ing day (even if the day of the week of the following day is not selected).
1) Target bit device
Specify up to 8 consecutive bit devices.
• In the setting on Screen 2, CH1 (M100) will remain ON from 15:12:10 to 15:15:12 on Mon-
day to Friday.
The OTHER MODE
screen is displayed.
The channel setting
screen is displayed.
CH1 to CH8
Paragraph 6.1
Select channels
(= bit devices)
1 to 8 to be set.
SET TIME SWITCH
Select "SET TIME
SWITCH" on the
screen.
Screen 1 Screen 2
MON TUE WEDTHU FRI
[OTHER MODE MENU]
END [SET TIME SWITCH]
(Example)
CH6 CH7 CH8CH5
CH2 CH3 CH4CH1 1)
END [SET TIME SWITCH]
END TIME 15:15:12
CH1
START TIME 15:12:10
SUN SAT
Screen 1 [CHANNEL] Screen 2