User`s manual

Graphic Operation Terminal F930GOT HPP Mode 4
4-6
4.2.3 Forced ON/OFF
Bit devices (Y, M and S) and word devices (T and C) can be forcedly set to ON/OFF.
When T, C, D, V or Z is forcedly set to OFF, its current value is reset to "0".
u
uu
u
Basic operation
u
uu
u
Operation example
Forced ON/OFF of output Y0 and auxiliary relay M0
Y/M/S/T/C/D/V/Z
monitor display
,
Move the cursor to a
device to be forcedly
set to ON/OFF.
ON
OFF
ON
OFF
Paragraph 4.1
Display Y0/M0
monitor using the
procedure described
in Paragraph 4.2.1.
ON OFF
ON
Display the
ON screen 1.
OFF
ON
ON
Display the
ON screen 2.
Move the
cursor to
M0.
Move the
cursor to
Y0.
OFF
OFF
Move the
cursor to
M0.
Screen 1
SET ON OFFDEV.
END [DEVICE MONITOR]
M 0Y000
Screen 2
SET ON OFFDEV.
END [DEVICE MONITOR]
M 0Y000