User`s manual

Graphic Operation Terminal F930GOT HPP Mode 4
4-5
u
uu
u
Operation example
Change of the current value of data register D0 from "300" to "200".
u
uu
u
Operation example
Change of the current value of T1 from "263" to "300", and change of the set value of T1 from
"1000" to "1500".
The HPP MODE
screen is displayed.
DEVICE MONITOR
Select "DEVICE
MONITOR" on the
screen.
D
16
Enter element
symbol "D16".
ENT
Start
change.
Execute change to
"200" from "300".
Refer to Fig. 2.
<Monitor of D0>
DEVICE 0
Display the
D0 monitor.
<Change of the current value of D0>
SET
2 0 0 ENT
Register "200"
as new value.
Paragraph 4.1
Fig. 1 Before change
SET ON OFFDEV.
END [DEVICE MONITOR]
CUR [ 300]D 0
Fig. 2 After change
SET ON OFFDEV.
END [DEVICE MONITOR]
CUR [ 200]D 0
<Monitor of T1>
DEVICE
Enter element
symbol "T".
T 1 ENT
Display the
T1 monitor.
Refer to
Fig.1.
<Change of the current
value of T1>
Start
change of
the current
value of
T1.
SET 3 0 0
Execute
change to
"300" from
"263".
ENT
Register
"300" as
new value.
<Change of the set
value of T1>
Start change
of the set
value of T1.
SET 1 5 0 0
Execute change
to "1500" from
"1000".
ENT
Register
"1500" as
new value.
Before change
SET ON OFFDEV.
END [DEVICE MONITOR]
CUR [ 263]T 1
After change
SET [ 1000]RST( )
SET ON OFFDEV.
END [DEVICE MONITOR]
CUR [ 300]T 1
SET [ 1500]RST( )