User`s manual

Graphic Operation Terminal F930GOT HPP Mode 4
4-3
u
uu
u
Operation example
Monitor of the ON/OFF status of inputs X000 and X001 and monitor of the current value and
the set value of timer T3.
n
nn
n
Important point
1) Monitor function when timers and counters are indirectly specified
If a data register used for the set value of a timer/counter as shown
in the program on the left, the contents of the data register is moni-
tored as the set value of the timer/counter when monitoring is per-
formed.
When the set value is changed (as described in the next page), the
contents of the data register are overwritten.
ON status
The ON/OFF status of each monitored
device is indicated as follows.
OFF status
The HPP
MODE screen
is displayed.
DEVICE MONITOR
Select "DEVICE
MONITOR" on the
screen.
DEVICE
Enter a device
symbol "X".
X
ENT
Select
"X0".
0
Display "X0"
on the screen.
DEVICE
Enter a device
symbol "T".
T 3
Select
"T3".
ENT
Display
Screen 2.
Display "X1"
on the screen.
Paragraph 4.1
Screen 1
SET ON OFFDEV.
END [DEVICE MONITOR]
X000 X001
Screen 2
SET ON OFFDEV.
END [DEVICE MONITOR]
CUR[ 10]
T 0
SET[ 100]RST( )
[Screen 1 is displayed.]
D5
D6
T10
C10